--- title: "akubela Gateway(G31) Configuration Guide v3.0.7" slug: "akubela-gatewayg31-configuration-guide" updated: 2025-09-30T01:31:15Z published: 2025-09-30T01:31:15Z canonical: "knowledge.akuvox.com/akubela-gatewayg31-configuration-guide" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # akubela Gateway(G31) Configuration Guide v3.0.7 ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-R9GKUI1Y.png) G31 ## Product Overview ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片1(24).png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片2(18).png) ## Basic Operations and LED Status | **Operation** | **Steps** | **LED /Buzzer** | | --- | --- | --- | | Power On | Connect to a power adapter using the provided USB-C power cable. | Solid red light | | Startup | 1. Device powers on and the Zigbee module initializes. | Green solid light, turns off after 5 seconds | | 2. ZigBee module is ready. | - **If not configured:** G31 automatically enters pairing mode with a green light flashes slowly for 10 minutes, then exits. - **If configured:** Yellow light flashes slowly for 10 seconds, then green flashes for 5 seconds before turning off. Pairing mode must be manually activated. | | Enter Pairing Mode | 1. Press and hold the button for 5 seconds. | Solid red light | | 2. The device is in pairing mode. | Buzzer beeps once with green light flashes slowly | | Factory Reset | 1. Quickly press the button 5 times within 2 seconds. | Yellow light flashes slowly | | 2. Press and hold the button for 5 seconds. | Solid red light | | 3. Factory reset complete. | Yellow light flashes slowly, then green flashes quickly | | Upgrade | / | Yellow solid light during upgrading | | Add Zigbee Devices | When Zigbee device discovered | Buzzer beeps once with green light flashes slowly once | ## Function Differences The G31 can function as either a home center or a gateway. Here are key distinctions in main functions and important notes when it serves as different roles. | ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-4O0GQ87S.png) | Home Center **(Cloud Connected)** | Gateway **(Other HyPanel** **device****s as Home Center)** | | --- | --- | --- | | Add & Control Zigbee Devices | ✔ | ✔ | | Add & Control 3rd-Party Devices | × | × | | Add & Control IR Devices | ✔ | ✔ | | Scenes | ✔ | ✔ | | Arming | × | ✔ | | Energy | × | × | | Intercom | ✔(Calls between app and door phones) | ✔(Calls between app and door phones) | | BelaHome App | ✔ | ✔ | | User Web Portal | × | ✔ | > [!NOTE] > **NOTE:** > > **When G31 is used as the home center:** > > - **Cloud Connection Recommended:** Full features, including scenes and third-party device integration, require cloud connection. > - **Local Use Limitations:** Without cloud connection, G31 functions and BelaHome app control are unavailable. > - **Gateway Restriction:** With G31 as home center, no other gateway devices or panels can be added as sub-gateways. ## Preparations 1. Power on the G31 and connect it to a network. 2. Update the G31 to the firmware version 31.1.37.19 or later. (1) Download required firmware from our [Knowledge Base](https://knowledge.akuvox.com/docs/gateway-firmware). (2) Make sure your computer and G31 are on the same network. (3) Install and use the IPscanner tool to find G31’s IP address. You can download the tool [here](https://knowledge.akuvox.com/docs/akuvox-ip-scanner). (4) Enter G31’s IP address into the browser. The default login credentials are both *admin*. (5) Click **Setting** on the Set Mode interface to enter G31’s device web portal. (6) Click **Settings > Upgrade**, and import the firmware. 3. Update the BelaHome app to the following versions: - iOS: 3.20.3 and later - Android: - Google: 3.20.0005 and later - Huawei: 3.20.1005 and later - Xiaomi: 3.20.1105 and later - OPPO: 3.20.1205 and later - vivo: 3.20.1305 and later ## Use G31 as Home Center ### 1. Connect G31 to akubela Cloud Connect the G31 to the cloud to access full features. (1) Log into the akubela cloud with the installer account. (2) Create a project and add the G31’s MAC address to the home. > [!WARNING] > **TIP:** > > You can click **Add Administrator** to create the family administrator account. This allows the user to log in to BelaHome app without the need for self-registration. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akubela-gatewayg31-configuration-guide-image-dhgu6ajk.png) (3) In the home template interface, add G31 as the home center. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akubela-gatewayg31-configuration-guide-image-xp7iu7pt.png) > [!WARNING] > **TIP:** > > For the detailed cloud-based project creating instructions, refer to the following guides: > > - [Community projects](https://knowledge.akuvox.com/docs/create-a-community-project-on-akubela-cloud). > - [Single-tenant projects](https://knowledge.akuvox.com/docs/create-a-single-tenant-project-on-akubela-cloud). ### 2. Configure G31 by Installers (1) Open the BelaHome app. Tap![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-VIK1M50Y.png) **> Installer** to enter the installer mode. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片1(33).png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-290VGUI7.png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-JWPQDSA9.png) (2) Log into with the installer or distributor account credentials. > [!NOTE] > **NOTE:** > > In Installer mode, the installer/distributor login account may differ from the account that created the family on akubela cloud. (3) Select **G31 configuration**, follow the onscreen instructions to put it into pairing mode, and then tap **Next**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片9(13).png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片10(11).png) (4) Connect your phone to the hotspot named “G31-xxxxxx(the last 6 digits of its MAC address)”. > [!NOTE] > **NOTE:** > > For G31 firmware versions earlier than 31.1.37.19, use password *Admin888* to connect. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片11(13).png) Once added, you can tap **Space Management** to modify the room settings, and press ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akubela-gatewayg31-configuration-guide-image-ofiss6ac.png) to add Zigbee devices. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片12(12).png) (5) Log out the installer account. ### 3. Bind G31 to the Family by Users (1) Log into the BelaHome app using the user account. > [!NOTE] > **NOTE:** > > If the user doesn’t have an account, tap **Sign Up** to register. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片2(26).png) (2) After signing in, follow the steps below depending on the G31’s connection method: - **Wired connection, no setup needed** If the G31 is connected via a wired network, its configurations and Zigbee devices (if previously added by the installer) will appear automatically on the Home screen. No further setup is required. - **Wi-Fi connection** If the G31 is not connected via a wired cable and needs Wi-Fi, or if you want to switch from wired to wireless: a. On the Home screen, tap **Click to Add**, and select **G31**. > [!NOTE] > **NOTE:** > > If the account is already bound to a family and you need to bind the G31 to a new family, go to **Me > Scan icon > No QR code available,bind a home manually > G31**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片3(21).png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片4(22).png) b. Select **G31(Wi-Fi)**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片13(11).png) c. Tap **Go Immediately**, then connect your phone to the hotspot named “G31-xxxxxx(the last 6 digits of its MAC address)” ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片14(13).png) d. Connect to a 2.4GHz Wi-Fi network. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akubela-gatewayg31-configuration-guide-image-9g3jphjo.png) Once completed, the G31 will beep, and the app will automatically turn to the Home screen. ![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akubela-gatewayg31-configuration-guide-image-zz6l6uib.png) ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akubela-gatewayg31-configuration-guide-image-yho74bn6.png) ### 4. Add Zigbee Devices and Create Scenes - Add Zigbee devices: Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-JTAK3MKC.png) to open the device scanning screen. Wait for automatic detection, or select the device type from the list to add it manually. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片5(15).png) - Create scenes: Go to Automation > ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-PTSC7VJW.png)to add a scene. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片6(15).png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片7(11).png) ## Use G31 as Sub-Gateway If a HyPanel device serves as the home center, you can add the G31 as a sub-gateway. ### 1. Add G31 to a HyPanel as a Sub-Gateway - **G31 using wired connection** (1) Put G31 in pairing mode. (2) On the BelaHome’s Home screen, tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akubela-gatewayg31-configuration-guide-image-w2ccgzt7.png) in the upper right to open the device scanning screen. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片8(14).png) (3) The G31 will be automatically detected within the same local network. Select it to add it to the family. - **G31 with Wi-Fi connection** In the device scanning screen, find the G31 from the device list, and then follow the on-screen instructions to complete setup. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-DY7NJUUN.png) ### 2. Add Zigbee Devices to G31 (1) On the BelaHome Home screen, tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-GYSZ763M.png) in the upper right and select the G31 as the gateway for adding Zigbee devices. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-TS2HXEEX.png) (2) Wait for automatic detection, or select the device type from the list to add it manually. ## Network Configuration Tips - To switch from Wi-Fi to a wired network, connect an RJ-45 Ethernet cable and restart the G31. - To change Wi-Fi, go to the G31 settings screen in the BelaHome app, tap **Change WiFi**, and follow the onscreen instructions. - The G31 cannot connect to networks in the 192.168.**240**.X range (Wi-Fi or wired) as its built-in hotspot uses this range, which would cause conflicts that prevent device setup.