Akuvox A08 Access Control Terminal Administrator Guide

Thank you for choosing the Akuvox A08 access control terminal. This manual is intended for the administrators who need to properly configure the access control terminal. This manual is written based on firmware version 108.30.1.17, and it provide...

Akuvox A08 series integrates a door controller and card reader into a single device, significantly reducing costs for building operators. It provides versatile credentials such as PIN codes, QR scanning, wave-to-unlock via Bluetooth, and mobile acce...

Status : This section gives you basic information such as product information, network information, and access logs. Network : This section covers LAN port settings. Access Control : This section covers relay, input, web relay, card setti...

Before configuring A08, please make sure the device is installed correctly and connected to a normal network. Using the Akuvox IP scanner tool to search the device IP address in the same LAN. Then use the IP address to log into the web browser. The ...

Language You can switch the web language between English and Chinese in the upper right corner. You can customize interface text including configuration names and prompt text. To set it up, go to Setting > Time/Lang interface. Export and ed...

Status Light You can turn on or off the status light and adjust its brightness. To set it up, go to Device > Light > Status Light interface. Status Light : The level ranges from 1-5. The higher the value is, the brighter it is. Status...

Volume and tone configuration include keypad volume, prompt volume, tamper alarm volume, and open-door tone configuration. To set it up, go to Device > Audio > Volume Control interface. Prompt Volume : Set the voice prompt volume. The defa...

To ensure normal functioning, make sure that the device has its IP address set correctly or obtained automatically from the DHCP server. To set it up, go to Network > Basic interface. DHCP : DHCP mode is the default network connection. I...

You can configure the relay switch(es) for door access on the web interface. Relay Switch To set up the relay, go to Access Control > Relay > Relay interface. Trigger Delay(Sec) : Set the delay time before the relay triggers. For example,...

Door Access Schedule A door access schedule lets you decide who can open the door and when. It applies to both individuals and groups, ensuring that users within the schedule can only open the door using the authorized method during designated tim...

Public PIN Code for Door Unlock There are two types of PIN codes for door access: public and private. A private PIN is unique to each user, while the public one is shared by residents in the same building or complex. You can create and modify both...

Tamper Alarm The tamper alarm function prevents anyone from removing the devices without permission. It does this by setting off the tamper alarm and making calls to a designated location when the device detects a change in its gravity value from ...

Access Log You can search and check door logs on the device web Status > Access Log interface. Save Access Log : Decide whether to save the door-opening records. Status : Success and Failed options represent successful door accesse...

System Log for Debugging System logs can be used for debugging purposes. To set it up, go to System > Maintenance > System Log interface. Log Level : Log levels range from 1 to 7. You will be instructed by Akuvox technical staff about t...

Akuvox devices can be upgraded on the device web interface. To upgrade the device, go to System > Upgrade interface. Note Firmware files should be in .rom format for upgrade.

Provisioning Principle Auto-provisioning is a feature used to configure or upgrade devices in batch via third-party servers. DHCP, PNP, TFTP, FTP, and HTTPS are the protocols used by the Akuvox devices to access the URL of the address of the thi...

Integration via Wiegand A08 access control terminal can be integrated with the third-party devices via Wiegand. To set it up, go to Device > Wiegand interface. Wiegand Display Mode : Select the Wiegand card code format from the provided o...

You can modify the device web password for both the administrator account and the user account. To set it up, go to System > Security > Web Password Modify interface. Click Change Password to modify the password. To enable or disable th...

Reboot Reboot the device on the web System > Upgrade interface. To set up the device restart schedule, go to System > Auto Provisioning > Reboot Schedule interface. Reset You can select Reset To Factory Setting if you want to reset ...