Akuvox C319 Series Indoor Monitor Administrator Guide

Thank you for choosing the Akuvox C319 series indoor monitor. This manual is intended for administrators who need to configure the indoor monitor properly. This manual is written based on firmware version 119.30.12.703, and it provides all the ...

C319 series is an Android SIP-based with a smooth touch-screen indoor monitor. It can be connected to the Akuvox door phone for audio/video communication, unlocking, and monitoring. Residents can communicate with visitors via audio/video calls, a...

Support Static DNS Setup .

Status : This section gives you basic information such as product information, network information, account information, etc. Account : This section concerns the SIP account, SIP server, proxy server, transport protocol type, audio & vide...

Device Start-up Network Selection After the device boots up initially, you are required to select the network connection for the device. You can either select Ethernet or wireless network connection. Note Please refer to the chapter on ...

Language Set up the language during initial device setup or later through the device or web interface according to your preference. Language Setting on the Device To select the language, go to Settings > Time&Language screen. The devi...

Screen Display Setting on the Device You can configure a variety of features of the screen display in terms of brightness, screen saver and font size, etc. Navigate to the device Settings > Display screen. Brightness : Move the blu...

Akuvox indoor monitor provides you with various types of ringtones and volume configurations. You can configure them on the device directly or on the web interface. Volume Configuration Configure Volume on the Device Set up the volumes on the dev...

Device Network Configuration To ensure normal functioning, make sure that the device has its IP address set correctly or obtained automatically from the DHCP server. Configure Device Network Connection on the Device Check and configure the netw...

Contacts Configuration on the Device You can add, edit, and delete contacts on the device Contacts> Local Contacts screen directly. Add Contact Press the Add icon to add a contact. Account 1 : The account to make the call, Acco...

IP Call Configuration An IP call is a direct call between two intercom devices using their IP addresses, without a server or a PBX. IP calls work when the devices are on the same network. Make IP Calls Make a direct IP call on the device Call ...

Auto-answer Configuration Auto-answer feature allows the device to automatically pick up incoming calls without any manual intervention. You can also customize this feature by setting the time duration for auto-answering and choosing the communica...

If you want to check on the calls inclusive of the dial-out calls, received calls, and missed calls in a certain period, you can check and search the call log on the device web interface and export the call log from the device if needed. To ...

Audio Codec The indoor monitor supports eight types of codecs for encoding and decoding the audio data during the call session. Each type of codec varies in terms of sound quality. You can select the specific codec with different bandwidths and sam...

Manage Messages You can check, create and clear messages as needed on the device Messages  screen. Tap +Add to create a message and tap Clear to delete messages. Notification : The message from the property manager. This feature...

Relay Switch Setting Local Relay Setting A local relay is an external unit that is physically nearby and directly connected to the intercom device. It allows the intercom system to trigger actions, such as unlocking a door, based on user input or...

Monitor and Image Monitor Setting You can add up to four video streams using RTSP. If the Display in Call function is enabled, the video of the added monitor device will show up when it calls the indoor monitor. To set it up,&nbs...

Users can summon a lift via the lift control feature. Configure Lift Control Before setting the Lift icon, you need to display it on the Home or More screen. To display the icon, go to the Device > Display Setting interface. To set the...

Albert is a voice assistant from Akuvox. It can help you with intercom calls, door opening, arming modes, and other functions. As for the door access control, you can choose which relay to activate by this voice assistant. To set it up, go to the...

Akuvox devices can be upgraded on the device web interface. Upgrade the device on the Upgrade > Basic interface. Click Import to upload the firmware file. Note Firmware files should be . zip format for the upgrade.

Provisioning Principle Auto-provisioning is a feature used to configure or upgrade devices in batch via third-party servers. DHCP, PNP, TFTP, FTP, and HTTPS  are the protocols used by the Akuvox devices to access the URL of the address of th...

Enter Applications Screen This part mainly teaches you how to enter the APK interface through hidden operations. Go to the Settings > System Info interface. Tap on User Mode 10 times. Then select Admin Mode and tap Confir...

You can import or export encrypted configuration files to your Local PC. To export the file, navigate to the Upgrade > Advanced > Others interface. The export file is in the TGZ file. The import file should be in TGZ, CONF, or CFG f...

System Log for Debugging System logs can be used for debugging purposes. If you want to export the system log to a local PC or a remote server for debugging, you can set up the function on the web Upgrade > Diagnosis > System Log interfa...

The indoor monitor has a built-in PBX server which allows the device to serve as an intercom monitor and a SIP PBX, so users do not bother to prepare an extra SIP PBX again. The PBX supports call forward, transfer, conference, ring group features, ...

Modify Device Basic Setting Password Settings Code is used to unlock the screen. The default is 123456. To modify it, go to the Settings > Advance > Protect Code screen and select Settings Code . Modify Device Advance Settings Passwor...

Reboot Reboot on the Device If you want to reboot the system setting of the device, you can operate it directly on the device setting screen or on the device web interface. To restart the system on the device, go to  Settings >...