---
title: "Akuvox Devices Work as Wiegand Output"
slug: "akuvox-devices-work-as-wiegand-output"
status: "update"
updated: 2026-08-06T07:43:42Z
published: 2026-08-06T07:43:42Z
canonical: "knowledge.akuvox.com/akuvox-devices-work-as-wiegand-output"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Akuvox Devices Work as Wiegand Output

Akuvox door phones/access control terminals can be integrated with the third-party access control system via Wiegand.

Users can enter PIN codes, swipe cards, scan their faces, or scan QR codes on Akuvox devices. When the verification passes on the third-party system that controls the door lock, the doors will be opened.

## Configuration

This article takes E16 V2 as an example.

1. Use the device IP to log into its web interface. The initial username and password are admin.
2. Set up the Wiegand feature on the **Device > Wiegand** interface.

### Unlock by PINs

Akuvox door phones/access control terminals can output PIN codes directly or in a designated format through Wiegand. This function applies to a scenario where the third-party access control system only receives PINs in a specific format.

> [!NOTE]
> Note
> 
> Specific models support outputting PINs in a designated format(The Convert to Wiegand Output option):
> 
> - S539, S538, S535, S532, X912, X915 V1/V2, X916, R29, R28 V2, R27, R25K, E16, E18, A02, and A08.

1. Set Wiegand Transfer Mode to **Output**.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-JXNZI9XJ.png)

1. Set the output PIN format that the third-party system can identify.

- 8 bits per digit: When users press "1" on the keypad, the binary data will be transmitted in 8 bits "11100001".
- 4 bits per digit: When users press "1" on the keypad, the binary data will be transmitted in 4 bits "0001".
- All at once: After users enter the whole PIN code, the data will be transmitted according to the Wiegand card reader mode. For example, “123456” will be converted to “01e240” in Wiegand 26.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-DOQBV8OK.png)

1. Click Submit.

- When **8 bits per digit** or **4 bits per digit** is selected, output the PIN by pressing “*+*PIN code+*#” on the door phone’s keypad.
- When **All at once** is selected, press the PIN code and then the Confirm tab.

### Unlock by RF Card Codes

Akuvox devices can directly output the RF card codes.

Set Wiegand Transfer Mode to **Output** and click Submit.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-JXNZI9XJ.png)

### Unlock by Facial Recognition

Akuvox devices cannot directly output face data via Wiegand. The face photo must be registered for a user and the user should have a card code. The third-party system verifies the card code for door opening.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/Untitled Diagram.png)

1. Go to the **Device > Wiegand** interface. Set Wiegand Transfer Mode to **Convert to Card No. Output.**

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1ABPJDH2.png)

1. Go to the **Directory > User** interface.
2. You can:

- click Add to add a new user;
- click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-39BNT9PH.png) to modify credentials for an existing user.

1. Enter the card code. Or, click **Obtain** and place the card on the door phone’s card reader area.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-LUUPS6PO.png)

1. Click **Select File** to choose the user’s front-face photo and upload it.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-JZHVID87.png)

1. Click Submit.

### Unlock by QR Codes

> [!WARNING]
> Tip
> 
> - When the device is deployed on the SmartPlus Cloud, property managers and end users can issue [temp keys](/v1/docs/clone-issue-temp-keys-to-visitors-and-couriers)(QR codes) to visitors or couriers.
> - When the device is deployed on-premise, users can use [QR codes](/v1/docs/open-the-door-via-qr-codes-generated-on-premise) generated by third-party software to open doors.

1. Go to the **Intercom > Wiegand** interface. Set Wiegand Transfer Mode.

- When the third-party system can identify the QR code value, set the Wiegand Transfer Mode to **Output**. In this case, the Akuvox door phones/access control terminals can directly output the QR code value.
- When the third-party system cannot identify the QR code value, set the Wiegand Transfer Mode to **Convert to Card No. Output**. Assign the QR code value and card code to the same user. When users scan QR codes, the device will find the user and output the card code.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/Untitled Diagram1.png)

> [!NOTE]
> Note
> 
> Models E16 V2/V3, X915V1/V2, S539, and A08 support outputting card codes when scanning QR codes.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1ABPJDH2.png)

1. Go to the **Directory > User** interface.
2. You can:

- click **Add** to add a new user;
- click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-XS4F1MMD.png) to edit an existing user.

1. Enter the QR code value in the **PIN** box.

> [!NOTE]
> Note
> 
> - Specific models support setting and identifying QR code values as PINs:
>   - E16 V2/V3, X915V1/V2, S539, and A08.
> - Only support identifying converted unencrypted QR codes.

1. Enter the card code in the **RF Card** box.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-APJYC96K.png)

1. Click Submit.