Akuvox DB01 Series Door Phone Administrator Guide

Thank you for choosing Akuvox DB01 door bell. This manual is intended for the administrators who need to properly configure the door bell. This manual applies to 201.30.2.106 or higher versions and it provides all the configurations for the func...

The security that comes with being able to control who comes into your building along with the ability to verbally and visually confirm their identity is immeasurable. DB01 series are SIP-compliant door bells. They can be connected with Akuvox indoo...

Status : this section gives you basic information such as product information, Network Information, and account information, etc. Account : this section concerns SIP account, SIP server, proxy server, transport protocol type, audio & vid...

DB01 series system setting can be accessed on the device web interface. Obtain Device IP Address Check the Device IP address by holding the push button for 5s. Or searching the device IP by the IP scanner in the same LAN network. Just click Sca...

Language Setting The language can be set up on the device web Setting > Time/Lang > Web Language interface according to your preference. Parameter Set-up : Mode : choose a suitable web language. Normally, English is the default web la...

LED Fill Light LED fill light is mainly designed to reinforce the light for facial recognition at night or in a dark environment, you can configure the LED light on the web interface. You can navigate to Device > LED Setting > LED Fill Light . ...

Volume and tone configuration include microphone volume, the AD volume, keypad volume, speaker volume, tamper alarm volume, and open-door tone configuration. Moreover, you can upload the tone you like to enrich your personalized user experience. ...

Network Status To check the network status on the web Status > Network Information interface. Device Network Configuration To ensure normal functioning, make sure that the device has its IP address set correctly or obtained automatical...

IP Call & IP Call Configuration An IP call is a direct call between two intercom devices using their IP addresses, without a server or a PBX. IP calls work when the devices are on the same network. Navigate to Intercom > Basic . Par...

Audio Codec Configuration The door phone supports four types of Codec (PCMU, PCMA, G729, and G722) for encoding and decoding the audio data during the call session. Each type of Codec varies in terms of sound quality. You can select the specifi...

The contacts list is for granting access or calling permission to the indoor monitor or other devices. To set it up on web Access Control > Access Allowlist . Managing Contacts You can search, create, display, edit and delete the contac...

Relay Switch Setting You can configure the relay switch(es) and DTMF for the door access on the web Access Control > Relay interface. Parameters Set-up : Type : if Default state is selected, the Relay State shows Low which mea...

Relay Schedule The relay schedule allows you to set a specific relay to always open at a certain time. This is helpful for situations like keeping the gate open after school or keeping the door open during work hours. To do the configurati...

Configure Open Relay via HTTP for Door Unlock You can unlock the door remotely without approaching the device physically for door entry by typing in the created HTTP command (URL) on the web browser to trigger the relay when you are not availab...

Tamper Alarm Setting The tamper alarm function prevents anyone from removing the devices without permission. It does this by setting off the tamper alarm and making calls to a designated location when the device detects a change in its gravity ...

MJPEG and RTSP are the primary monitoring stream types discussed in this chapter. MJPEG, or Motion JPEG, is a video compression format that uses JPEG images for each video frame. Akuvox door phones display live streams on the web interface and ...

Call Logs If you want to check on the calls inclusive of the dial-out calls, received calls, and missed calls in a certain period of time, you can check and search the call log on the device web interface and export the call log from the device...

System Log System logs can be used for debugging purposes. You can set up the function on the web Upgrade > Diagnose > System Log interface. Parameters Set-up : Log Level : select log levels from 1 to 7 levels. You will be i...

Akuvox devices can be upgraded on the device web interface. Go to Upgrade > Basic interface. Note Do not disconnect the device from internet and power supply when the firmware upgrade is in progress, otherw...

You can import or export encrypted configuration files to your Local PC. To configure on Upgrade > Diagnose > Others interface if needed. Parameters Set-up : Export/Import : to export current config file (Encrypted) or import ne...

You can configure and upgrade the door phone on the web interface via one-time auto- provisioning and scheduled auto-provisioning via configuration files, thus saving you from setting up configurations needed one by one manually on the door phone...

Modify Device Web Interface Password To change the default web password on web Security > Basic interface. Select admin for the administrator account and User for the User Account. Click the Change Password tab to change the passw...

Reboot If you want to restart the device system, you can operate it on the device Upgrade > Basic web interface as well. Reset If you want to reset the device system to the factory setting, navigate to the web Upgrade > Basic interface....