Akuvox EC33 Lift Control Administrator Guide

Thank you for choosing the Akuvox EC33 lift controller. This manual is intended for administrators who need to properly configure the lift controller. This manual is written based on firmware version 33.30.0.82, and it provides all the configura...

The EC33 controls the elevator using its network-connected relays, providing a smart access control solution for the building. It integrates with Akuvox intercom products to manage access to the key-fobbed elevator. Administrators can configure comp...

This section describes the basic instructions for the start-up operation of the E33 lift control. Requirements To deploy the EC33 lift control for the lift control application, make sure that: You have powered up the EC33. You have networked...

Akuvox EC33 lift control configuration includes 6 main menus: Status , Network , Directory , Device , Setting , and System.

Info This submenu displays the device's basic information and network settings. Navigate to the web Status> Info interface. Alarm Log The alarm log can store up to 100,000 logged alarm events. Every event contains time and date, event type,...

To ensure normal functioning, make sure that the device has its IP address set correctly or obtained automatically from the DHCP server. Navigate to the web Network > Basic interface. DHCP is the default network connection. The device w...

The directory section lists all the user's information and the access controls you have set up for them. You can search, delete, and edit the users. User Management When adding users, you need to set up their unique user information, and the acces...

Elevator Access Control and Fire Alarm You can conduct elevator access control on the web interface. You can click a specific floor number (the relay-based number) to allow access to the specific floor, click Open All to allow all floor access by...

Time Time settings on the web interface allows you to set up the NTP server address that you obtained to automatically synchronize your time and date. When a time zone is selected, the device will automatically notify the NTP server of the time zo...

You can configure and upgrade the device on the web interface via one-time auto-provisioning and scheduled auto-provisioning via configuration files, thus saving you from setting up configurations needed one by one manually. Provisioning Principle ...

Upgrade You can select Reset To Factory Setting if you want to reset the device (deleting both configuration data and user data such as RF cards, face data, and so on). Or, select Reset Configuration to Default State (Except Data) , if you want ...