Akuvox S539 Door Phone Administrator Guide

Thank you for choosing the Akuvox S539 series door phone. This manual is intended for administrators who need to properly configure the door phone. This manual applies to version 539.30.10.6, and it provides all the configurations for the functi...

Akuvox S539 series products are Android-based IP video door phones with touch screens. It incorporates audio and video communications, access control, and video surveillance. Its finely tuned Android OS, Cloud, and AI-based communication technology ...

Status : this section gives you basic information such as product information, network information, call log, and door log, Account : this section concerns the SIP account, SIP server, proxy server, transport protocol type, audio&video codec, ...

Door phones' system settings can be either accessed on the device directly or on the device web interface. Access the Device Setting on the Device Before configuring door phone, please make sure the device is installed correctly and connec...

Language Setting Set up the language during initial device setup or later through the device or web interface according to your preference. Language Setting on the Device To configure the language display on the device Basic Setting > L...

Infrared LED Setting Infrared LED is mainly designed to reinforce the light for facial recognition at night or in a dark environment, you can configure the infrared LED in the device and on the web interface. Infrared LED Setting on the Device ...

The door phone allows you to enjoy a variety of screen displays to enrich your visual and operational experience through customized settings to your preference. Screensaver Configuration Configure Screensaver on the Device Sleep mode and scree...

Volume and tone configuration include microphone volume, the AD volume, keypad volume, speaker volume, tamper alarm volume, and open-door tone configuration. Moreover, you can upload the tone you like to enrich your personalized user experience. ...

Device Network Configuration To ensure normal functioning, make sure that the device has its IP address set correctly or obtained automatically from the DHCP server. To configure on the device Setting > Network interface. Paramete...

IP Call & IP Call Configuration An IP call is a direct call between two intercom devices using their IP addresses, without a server or a PBX. IP calls work when the devices are on the same network. Make IP Calls To make SIP calls or IP c...

Maximum Call Duration Setting The door phone allows you to set up the call time duration in receiving the call from the calling device as the caller side might forget to hang up the intercom device. When the call time duration is reached, the d...

Phone Book Configuration on the Device You can create contact groups for users. Go to Setting> User > Group to create a contact group, then go to the Users List to configure the contact setting for the users. Parameter S...

Relay Switch Setting You can configure the relay switch(es) and DTMF for the door access on the web Access Control > Relay interface. Parameter Set-up : Trigger Delay (Sec) : set the relay trigger delay timing (Ranging from 1-10 Sec)...

Access Schedule You can create door access schedules so that they can be later conveniently applied to the door access control intended for individual users or a group of users created. Moreover, you can edit your door access schedule if needed...

Access Authentication You can set up multiple access authentication modes, and set up authentication security as needed. On the web, navigate to Settings> Key/Display > Access Authentication Mode interface. Parameter Set-up : ...

Tamper Alarm Setting The tamper alarm function prevents anyone from removing the devices without permission. It does this by setting off the tamper alarm and making calls to a designated location when the device detects a change in its gravity ...

MJPEG and RTSP are the primary monitoring stream types discussed in this chapter. MJPEG, or Motion JPEG, is a video compression format that uses JPEG images for each video frame. Akuvox door phones display live streams on the web interface and ...

Call Logs If you want to check on the calls inclusive of the dial-out calls, received calls, and missed calls in a certain period of time, you can check and search the call log on the device web interface and export the call log from the device...

System Log for Debugging System logs can be used for debugging purposes. You can export the system out to a local PC or to a remote server for debugging. To set up the function on the web System > Maintenance > System Log interface. ...

Akuvox devices can be upgraded on the device web interface. You can go to System> Upgrade interface. Note Firmware files should be in .zip format for the upgrade.

You can import or export encrypted configuration files to your Local PC. Go to System > Maintenance > Others interface.

Auto-provisioning via Configuration File You can configure and upgrade the door phone on the web interface via one-time auto- provisioning and scheduled auto-provisioning via configuration files, thus saving you from setting up configurations n...

Integration via Wiegand The Wiegand feature enables Akuvox door phone to act as a controller or a card reader. you can configure it on the web Device > Wiegand interface. Parameter Set-up : Wiegand Display Mode : select Wiega...

The door phones can be connected to the Akuvox lift controller for the lift control. Users can summon the lift to go down to the ground floor when they are granted access through various types of access methods on the door phone. To set up t...

Modify Device Web Interface Password To change the default web password on web System > Security > Web Password Modify interface. Select admin for the administrator account and User for the User Account. Click the Change Password tab...

Reboot To restart the system setting on the web System > Upgrade interface. To reboot the device, go to Advanced Setting > Reboot . Reset You can select Reset To Factory Setting if you want to reset the device (deleting both ...