Akuvox S560 Series Indoor Monitor Administrator Guide

Thank you for choosing the Akuvox S560 series indoor monitor. This manual is intended for the administrators who need to properly configure the indoor monitor. This manual applies to the 560.30.10.10 version, and it provides all the configuratio...

S560 series is a Linux SIP-based indoor device. It can be connected to the Akuvox door phone for audio communication and unlocking and can be deployed and maintained on the SmartPlus platform along with Akuvox door phones and SmartPlus app. It is ec...

Status : This section gives you basic information such as product information, network Information, account information, etc. Account : This section concerns the SIP account, SIP server, proxy server, transport protocol type, audio codec...

Within the same local network, you can enter the device IP address on the web browser to log into the device web interface where you can configure parameters. Obtain Device IP Address Note Ensure the device is connected...

Language Setting When you first set up the device, you might need to set the language to your need or you can do it later if needed. And the language can be set up on the device web interface according to your preference. Navigate to Phone > Ti...

Indicator Light Display Status The device has an indicator light installed on the top surface. The light colors vary by the state the device is currently in. You can change light colors and states that represent the device status on the Phone > D...

S560 provides you with various types of ringtones and volume configurations. You can configure them on the device web interface. Volume Configuration You can set up volumes on the device Phone > Audio interface. Note Ring volume and talk...

Device Network Configuration You can check the indoor monitor’s network connection info and configure the default DHCP mode ( Dynamic Host Configuration Protocol ) and static IP connection for the device on the device's web interface. Navigate ...

SIP Call Session Initiation Protocol( SIP ) is a signaling transmission protocol used for initiating, maintaining, and terminating calls. A SIP call uses SIP to send and receive data between SIP devices, and can use the internet or a local ne...

Direct IP Call IP calls and SIP calls can be made directly on the intercom device by entering the IP number on the device. Press Button to Make a Call You can quickly make a call with the preset number by pressing on the device. To set up the ...

The device supports four types of Codec (PCMU, PCMA, G729, and G722) for encoding and decoding the audio data during the call session. Each type of Codec varies in terms of sound quality. You can select the specific codec with different bandwidths a...

Remote Relay Switch Setting You can use the unlock tab during the call to open the door. And you are required to set up the same DTMF code in the door phone and indoor monitor. Go to the web Phone > Relay > Remote Relay interface. Param...

Door Unlock by DTMF Code In order to achieve door access via DTMF code or some other applications, you are required to properly configure DTMF in order to establish a DTMF-based data transmission between the door phone and other intercom devices fo...

Voice Encryption The encryption function provides you with greater security for the intercom call. And Akuvox indoor monitors support three modes of voice encryption: SRTP(Compulsory), SRTP(Optional), ZRTP(Optional) . To configure this feature on...

Akuvox devices can be upgraded on the device web interface. Navigate to Upgrade > Basic interface and click Select File . Note The file uploaded should be in .rom format.

You can import or export encrypted configuration files to your Local PC. Go to Upgrade > Advanced > Others interface if needed. Note The file imported should be in .tgz, .conf , or .cfg format.

You can configure and upgrade the door phone on the web interface via one-time auto- provisioning and scheduled auto-provisioning via configuration files, thus saving you from setting up configurations needed one by one manually on the door phone...

If you want to check on the calls inclusive of the dial-out calls, received calls, missed calls, and forwarded calls in a certain period, you can check and search the call log on the device web interface and export the call log from the device if ne...

System Log for Debugging System logs can be used for debugging purposes. You can set up the function on the web Upgrade > Advanced > System Log interface. Parameter Set-up : Log Level : select log levels from 0 to 7 levels. You wil...

Modify Device Web Interface Password To modify web interface password, you can do it on device web interface. Select admin for the administrator account and user for the user Account. Click the Change Password tab to change the password. ...

Reboot You can reboot the device by inserting a pin into the reset hole and holding it for three seconds. You can also operate it on the device web interface. Navigate to Upgrade > Basic interface. Reset You can reset the device by b...