Akuvox S565 Series Indoor Monitor Administrator Guide

Thank you for choosing the Akuvox S565 series indoor monitor. This manual is intended for administrators who need to configure the indoor monitor. This manual is written based on firmware version 565.30.10.27, and it provides all the configurati...

10"touch screen with 1280x800 resolution Stylish industrial design Two-way audio communication Built-in Wi-Fi(Optional) Comply with SIP standard for easy integration with SIP-capable PBXes Eight-channel inputs and one built-in relay...

Status: T his section gives you basic information such as product information, network information, account information, etc. Account : This section concerns the SIP account, SIP server, proxy server, transport protocol type, audio and vide...

The indicator light is on the right side of the device, showing the different status of the device. See the indicator light status below: Note The alarm status light has the highest priority.

Akuvox indoor monitor system settings can be either accessed on the device directly or on the device web interface. Device Start-up Network Selection After the device boots up initially, you are required to select the network connection for th...

Language Setting Set up the language during initial device setup or later through the device or web interface according to your preference. Language Setting on the Device To select the desired language, go to Settings > Time & Language...

Screen Display Setting on the Device You can configure a variety of features of the screen display in terms of brightness, screen saver and font size, etc. To set it up, navigate to the device Settings > Display screen. Brightne...

Akuvox indoor monitor provides you with various types of ringtones and volume configurations. You can configure them on the device directly or on the web interface. Volume Configuration Configure Volume on the Device To set up the volumes,...

Device Network Configuration To ensure normal functioning, make sure that the device has its IP address set correctly or obtained automatically from the DHCP server. Configure Device Network Connection on the Web Interface Check the network...

Contacts Configuration on the Web Interface Add Local Contacts Add, edit, and search local contacts on the device's web interface. To add contacts, go to Contacts > Local Contacts > Local Contacts List interface, then click +Add . ...

IP Call & IP Call Configuration An IP call is a direct call between two intercom devices using their IP addresses, without a server or a PBX. IP calls work when the devices are on the same network. Make IP Calls To make a direct IP call on ...

Auto-answer Configuration Auto-answer feature allows the device to automatically pick up incoming calls without any manual intervention. You can also customize this feature by setting the time duration for auto-answering and choosing the communi...

Audio Codec Configuration The device supports four types of Codec (PCMU, PCMA, G729, and G722) for encoding and decoding the audio data during the call session. Each type of Codec varies in terms of sound quality. You can select the specific code...

Manage Messages You can check, create and clear messages as needed on the device Messages screen. Tap +Add to create a message and tap Clear to delete messages. Notification : The message from property managers, this featu...

Relay Switch Setting Local Relay Setting A local relay is an external unit that is physically nearby and directly connected to the intercom device. It allows the intercom system to trigger actions, such as unlocking a door, based on user inpu...

Monitor and Image Monitor Setting You can add up to four video streams using RTSP. If the Display in Call function is enabled, the video of the added monitor device will show up when it calls the indoor monitor. To set it up, navigate to th...

Users can summon a lift via the lift control feature. Configure Lift Control Before setting the Lift icon, you need to display it on the Home or More screen. To display the icon, go to the Device > Display Setting interface. To set the Li...

Provisioning Principle Auto-provisioning is a feature used to configure or upgrade devices in batch via third-party servers. DHCP, PNP, TFTP, FTP, and HTTPS are the protocols used by the Akuvox devices to access the URL of the address of the thi...

If you want to check on the calls inclusive of the dial-out calls, received calls, and missed calls in a certain period of time, you can check and search the call log on the device web interface and export the call log from the device if needed. ...

Akuvox devices can be upgraded on the device web interface. To upgrade the device, navigate to the Upgrade > Basic interface. Note Firmware files should be . rom format for the upgrade.

You can import or export encrypted configuration files to your Local PC. To export the file, navigate to the Upgrade > Advanced > Others interface. The export file is in the TGZ file. The import file should be in TGZ, CONF, or CFG format.

System Log for Debugging System logs can be used for debugging purposes. To set it up, navigate to the web Upgrade > Diagnosis interface. Log Level : Log level ranges from 1 to 7 levels. You will be instructed by Akuvox technic...

Smart Living Setting You can control the home sensor through an HTTP command. You can add up to 8 control buttons. Navigate to the web Device > Smart Living interface. Status : Enable or disable this button. If disabled, the button won...

Modify Device Basic Setting Password The Settings Code is used to access the device's basic settings. To modify it, go to the Settings > Advance Settings > Protect Code screen. The default password is empty. Modify Device Advance S...

Reboot Reboot on the Device If you want to reboot the system setting of the device, you can operate it directly on the device setting screen or on the device web interface. To restart the system on the device, go to Settings > Advance Settings...