---
title: "Arming and Alarm"
slug: "arming-and-alarm"
updated: 2025-12-30T09:57:25Z
published: 2025-12-30T09:57:25Z
canonical: "knowledge.akuvox.com/arming-and-alarm"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Arming and Alarm

The Arming function is designed to enhance home security by offering three modes with custom zone settings for connected sensors. When armed, the device will sound a siren and notify specific people if a sensor detects something unusual.

## Switch Arming Mode

After your administrator displays the **Arming** tab on the device screen, you can switch arming mode on the **Arming** screen.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screen - 2025-12-10T113914.468.bmp)

## Set up Alarm Sensors in Different Arming Modes

After your administrator displays the **Arming** tab on the device screen, you can set up alarm sensors on the **Arming > Arming Mode** screen.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screen - 2025-12-10T135010.621.bmp)

- **Place**: Display which location of the detection device is in.
- **Type**: Display the alarm sensor type, including Infrared, Drmagnet, Smoke, Gas, and Urgency.
- **Defence Delay**: It means when you change the arming mode from other modes, there will be 30 seconds delay time to get activated.
- **Alarm Delay**: It means when the sensor is triggered, there will be 90 seconds delay time to announce the notification.
- **Status**: Enable or disable Arming Mode on the corresponding zone.

## Set up the Disarm Code

After your administrator displays the **Arming** tab on the device screen, you can set up the disarm code on the **Arming > Arming/Disarm Code** screen. The default code is 0000.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screen - 2025-12-10T135204.929.bmp)

## Check Zone Status

After your administrator displays the **Arming** tab on the device screen, you can check the zone status on the **Arming > Zone Status** screen.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screen - 2025-12-10T135300.903.bmp)

## Check Alarm Logs

After your administrator displays the **Arming** tab on the device screen, you can check the alarm log on the **Arming > Alarm Log** screen.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screen - 2025-12-10T135345.500.bmp)