---
title: "Configuration"
slug: "c-3"
updated: 2026-08-14T03:01:23Z
published: 2026-08-17T08:33:28Z
canonical: "knowledge.akuvox.com/c-3"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Configuration

## Program the Lock

For manual configuration, use the keypad commands below.

> [!WARNING]
> **TIP:**
> 
> - The default admin code is 123456.
> - Press * to cancel or return, and # to confirm.

### 

### Access Management Settings Menu

1. Wake the keypad.
2. Press * #, enter the admin credential, then press #.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-4RR7XG44.png)

### Customize System Language

> [!NOTE]
> **NOTE:**
> 
> The Language can only be set while the lock is in its initial state - before the administrator has been added (i.e., after a reset or at first installation).

1. Enter the corresponding number.
2. Press # to change the language.

| **Number** | **Language** |
| --- | --- |
| 555666880 | Chinese |
| 555666881 | English |
| 555666882 | Vietnamese |
| 555666883 | Portuguese |
| 555666884 | Arabic |
| 555666885 | Russian |
| 555666886 | Thai |
| 555666887 | Spanish |
| 555666888 | Indonesian |

### 

### Add Admin / User Credential

#### Add Fingerprint

1. Press ***# + admin credentials + #**.
2. Select **Administrator settings** or **User settings**.
3. Select **Add Administrator** or **Add user**.
4. Scan your fingerprint several times.

#### Add Password

1. Press ***# + admin credentials + #**.
2. Select **Administrator settings** or **User settings**.
3. Select **Add Administrator** or **Add user**.
4. Enter a new 6-8 digits password and **#**.
5. Enter the new password again and **#**.

#### Add Card

1. Press *# + admin credentials + #.
2. Select **Administrator settings** or **User settings**.
3. Select **Add Administrator** or **Add user**.
4. Place a card against the card reader icon.

### 

### Delete User Credential

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-2QLS0O50.png)

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-Y4I2DIH9.png)

### Set Voice / Unlock Mode

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-12RBLAB5.png)

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-HSJCXK3H.png)

> [!WARNING]
> **TIP:**
> 
> Combination Unlock is the two-factor authentication which requires at least two different credential types to be registered.

### 

### Network Settings

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-VV4IZ12H.png)

### Reboot System

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-MEYZ0UOA.png)

## 

## Add SL30 to the akubela System

Integrating the SL30 into your akubela system enables centralized management across all smart panels and mobile devices.

Once added, the lock is accessible via the following paths:

- **Category > Security > All Devices**
- **Room > *[specific room]* > Device**

![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/c-image-37baesr9.png)

![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/c-image-8owseh1a.png)

### Pair with HyPanels

For the most stable connection, it is recommended to use the QR Code or Bluetooth pairing. Use AP hotspot mode when the Bluetooth pairing fails.

Refer to [this video](https://knowledge.akuvox.com/docs/video-add-sl30-smart-lock-to-akubela-system) for detailed instructions.

Once paired, the lock can be controlled from both the HyPanel and the BelaHome app.

### 

### Standalone Operation

If no akubela panel is available, the SL30 can be used as a standalone device. Refer to [this video(from 2:07)](https://knowledge.akuvox.com/docs/video-add-sl30-smart-lock-to-akubela-system) for detailed instructions.

Once added, the lock can be controlled from the BelaHome app.

## 

## Remove SL30 from the akubela System

The SL30 can be removed from the system through the app, the physical hardware, or the user web portal.

**Method 1: Via the BelaHome App**

- Go to ***[SL30 device card]* >** ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-V6JT0BV9.png) **> Unbind Device.**

**Method 2: Hardware Factory Reset**

1. Remove the internal battery cover.
2. Use a pin to hold the Reset button.
3. When prompted by the voice, tap the # key on the exterior keypad.

**Method 3: Via akubela Panels (When Paired with an akubela Panel)**

- Large Screen Panels: Go to **Security > *[SL30 Device Card]* >** ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-3GOIMMS0.png) **> Delete**.
- Small Screen Panels: Swipe down from top of any screen, then tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-5PGIT28Z.png) **> Device Management > SL30 Smart Lock >** ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-I2YBJS88.png) **> Delete.**

**Method 4: Via User Web Portal (When Paired with an akubela Panel)**

1. Enter the IP address of your home center into a web browser.
2. Log in with the family administrator account.
3. Go to **Devices > *[SL30 Device Card]* > Delete > Confirm**.