Akuvox C315 Series Indoor Monitor Administrator Guide

Thank you for choosing the Akuvox C315 series indoor monitor. This manual is intended for the administrators who need to properly configure the indoor monitor. This manual applies to the 115.30.10.4 version, and it provides all the configuration...

C315 series is an Android SIP-based indoor monitor with a smooth touch-screen. It can be connected with the Akuvox door phone for audio/video communication, unlocking, and monitoring. Residents can communicate with visitors via audio/video call,...

Add High Security Mode .

Status : this section gives you basic information such as product information, network information, account information, etc. Account : this section concerns the SIP account, SIP server, proxy server, transport protocol type, audio & video codec...

Akuvox indoor monitor system settings can be either accessed on the device directly or on the device web interface. Device Start-up Network Selection Akuvox indoor monitor system settings can be either accessed on the device directly or...

When you first set up the device, you might need to set the language to your need or you can do it later if needed. And the language can either be set up directly on the device or on the device web interface according to your preference. Lan...

Screen Display Setting on the Device You can configure a variety of features of the screen display in terms of brightness, screen saver and font size, etc. You can do this configuration on the device More > Settings > Display screen. ...

Akuvox indoor monitor provides you with various types of ringtones and volume configurations. You can configure them on the device directly or on the web interface. Configure Volume on the Device You can adjust the microphone volume, sp...

Device Network Configuration To ensure normal functioning, make sure that the device has its IP address set correctly or obtained automatically from the DHCP server. Configure Network Connection on the Device To check and configure the n...

Phone Book Configuration on the Device You can configure the contacts list in terms of adding and modifying contact groups or contacts on the device More > Contacts directly. Add Contacts Press the Add icon to add a contact. Par...

IP Call & IP Call Configuration An IP call is a direct call between two intercom devices using their IP addresses, without a server or a PBX. IP calls work when the devices are on the same network. To configure the IP call feature and port...

Call Auto-answer Configuration Auto-answer feature allows the device to automatically pick up incoming calls without any manual intervention. You can also customize this feature by setting the time duration for auto-answering and choosing the c...

Relay Switch Setting Local Relay Setting A local relay is an external unit that is physically nearby and directly connected to the intercom device. It allows the intercom system to trigger actions, such as unlocking a door, based on user inpu...

Door Unlock by DTMF Code Dual-tone multi-frequency signaling( DTMF ) is a way of sending signals over phone lines by using different voice-frequency bands. Users can use the DTMF function to unlock the door for visitors during a call by either ...

Manage Text Messages You can check, create and clear messages as needed on the indoor monitor Messages screen. Click New to create a new text message and Clear icon to delete the existing messages. Manage Voice Messages You can creat...

Audio Codec Configuration The device supports seven types of Codec (iLBC_13_3, iLBC_15_2, L16, PCMU, PCMA, G729, and G722) for encoding and decoding the audio data during the call session. Each type of Codec varies in terms of sound quality. You c...

Provisioning Principle Auto-provisioning is a feature used to configure or upgrade devices in batch via third-party servers. DHCP, PNP, TFTP, FTP, and HTTPS are the protocols used by the Akuvox devices to access the URL of the address of the ...

Monitor and Image Monitor Setting You can add up to four video streams using RTSP. If the Display in Call function is enabled, the video of the added monitor device will show up when it calls the indoor monitor. Navigate to the web Phon...

If you want to check on the calls inclusive of the dial-out calls, received calls, and missed calls in a certain period, you can check and search the call log on the device web interface and export the call log from the device if needed. You...

You can summon a lift via the lift control feature. Configure Lift Control To enable and set the Lift icon on device web Phone > Lift > Lift Control interface. Parameter Set-up : Status : click to enable or disable the lift but...

Enter Applications Screen The content of this part mainly teaches you how to enter the APK interface through hidden operations. To do the configuration on device Settings > System Info screen. You can press on User Mode 10 times and p...

Akuvox devices can be upgraded on the device web interface. Firmwares of different versions for the indoor monitors can be upgraded on the device web Upgrade > Basic interface. Note Firmware files should b...

You can import or export encrypted configuration files to your Local PC. Navigate to Upgrade > Advanced > Others interface if needed.

System Log for Debugging System logs can be used for debugging purposes. Go to Upgrade > Diagnosis > System Log interface. Parameter Set-up : Log Level : select log levels from 1 to 7 levels. You will be instructed by Akuvo...

Modify Device Basic Settings Password To do the configuration on the device Advance Settings > System Code screen to change a new password. The default password is 123456. Modify Device Advance Settings Password This password is used to ...

Reboot Reboot on the Device If you want to reboot the system setting of the device, you can operate it directly on the device setting screen or on the device web interface. To reboot to the system setting on device Settings >Reboot scr...