---
title: "Register a Third-Party SIP Account on HyPanel"
slug: "register-a-third-party-sip-account-on-hypanel"
updated: 2025-09-18T07:14:55Z
published: 2025-09-18T07:14:55Z
canonical: "knowledge.akuvox.com/register-a-third-party-sip-account-on-hypanel"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Register a Third-Party SIP Account on HyPanel

If your project uses an external SIP server, you can register a third-party SIP account via the HyPanel device web portal to make calls.

## Before Getting Started

1. Make sure you have the following details from your SIP server:

- SIP account name
- Password
- Server address
- Port number

1. Find your HyPanel’s IP address on **Settings > System Settings > About**.

## Steps

1. Open a browser, enter the HyPanel’s IP address, and log in. The default username and password are both *admin*.
2. In the device web portal, find the target panel, and click **Setting** at the bottom left.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片1(36).png)

1. Go to **Account** page and enter the following:

- **Display Name:** The name shown on the device during calls.
- **Register Name / User Name / Password / SIP Server Address / SIP Server Port:** Provided by your SIP server.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1758179519726.png)

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/65.-register-a-third-party-sip-account-on-hypanel-image-7mhsfqof.png)

1. (Optional) Enable Outbound Proxy Server, and enter the proxy address and port number.

> [!WARNING]
> **TIP:**
> 
> The outbound proxy server forwards SIP messages from the HyPanel to the SIP server. Use an outbound proxy when:
> 
> - Your SIP provider requires it,
> - Direct registration fails due to firewall or NAT restrictions, or
> - It’s needed for load balancing or redundancy.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/65.-register-a-third-party-sip-account-on-hypanel-image-jekhbzv4.png)

1. Return to the SIP Account section and turn on **Account Enable**.

When Status changes to “Registered”, the SIP account is successfully configured.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/65.-register-a-third-party-sip-account-on-hypanel-image-qk675c0l.png)