--- title: "Check Who Called on Indoor Monitors" slug: "capture-images-for-indoor-monitors" status: "update" updated: 2026-10-12T03:46:44Z published: 2026-10-12T03:46:44Z canonical: "knowledge.akuvox.com/capture-images-for-indoor-monitors" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Check Who Called on Indoor Monitors Akuvox indoor monitors can automatically capture images during incoming calls, allowing users to identify visitors from missed-call records when they are unable to answer. Automatic image capturing is supported on Akuvox indoor monitors, with different default settings and configuration options depending on the operating system. - **Android indoor monitors:** The feature is enabled by default. - **Linux indoor monitors:** Use the **Capture Enable** switch to enable or disable the feature. ## Configure Automatic Image Capturing The following steps use the S562 as an example. 1. Log in to the device’s web interface with the username and password. The default is admin. 2. Navigate to the **Contacts > Call Log** interface and enable the feature. 3. Configure the **Capture Delay** as needed, which determines the intervals between two screenshots. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-V9T8G0T0.png) 1. Click Submit to save the configuration. ## View Captured Images After enabling the feature, users can view the captured images on the indoor monitor. 1. On the indoor monitor, go to **Call > Call Log**. 2. Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-GB14DL57.png) of the relevant call record. 3. Tap **Call log detail** to view the captured image. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-F03IWI1P.png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screen (91).bmp)