--- title: "Control Devices" slug: "cd-2" updated: 2026-08-06T08:56:25Z published: 2026-08-07T08:19:28Z canonical: "knowledge.akuvox.com/cd-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Control Devices ## Control a single device ### Relay HyPanel Elite 7 allows direct connection to a relay whose type can be siren, door, DND, and MUR(make up room). ![screen (17)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-5v1zizt4.png) To open/close a relay, just tap the ON/OFF button. ![screen (26)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-g4fkfjzd.png) > [!NOTE] > **NOTE:** > > - The relay type can be changed via the BelaHome app or on the home center device(if the HyPanel Elite 7 acts as a **gateway**). > - Changing the relay type will remove it from any scenes, group controls, or shortcuts added to the home page. ### Switch, plug, and socket To turn on your switch, socket, siren or a light, simply tap the ON/OFF button. ![screen (27)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-gu17suk1.png) ### Lighting device For lights that can only be turned on or off, simply tap the ON/OFF button. ![screen (28)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-8tgzvwx6.png) For others like RGB lights, you can adjust their brightness directly by adjusting the slider, or tap the device card to access more control options: - To turn a light on or off, tap the ON/OFF button. - To adjust the brightness and the color temperature, drag their sliders. - To change the light color, swipe left and pick the desired color from the palette. ![screen (43)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-xbwf5mb0.png) ### Heating, cooling, and thermostat > [!NOTE] > **NOTE:** > > When used as a **gateway**, HyPanel Elite 7 can control supported climate devices. However, certain devices, such as Ecobee thermostats, are not supported. You can turn on/off the device or adjust the target temperature directly on the Clime screen: ![screen (71)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-sa5zhb16.png) Or tap the device card to access more control options: ![screen (72)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-5889yd1n.png) - Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-SAIPNEJT.png) to switch modes. - Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-0KA9Y7SJ.png) to to set the fan speed. - Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-IBW04MMI.png) or ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-0H9EMN10.png), or drag the slider, to adjust the desired temperature ranging from 5-35℃. - Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-5UBICXF9.png) to turn the device on or off. ### ### Shade and curtain On the Shades screen, control shades or curtains by doing as the following: ![screen (29)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-88zs80tw.png) - Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-QTGW1XJ3.png) to open the shade. - Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-5TZQM73G.png) to close the shade. - Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-Q3CIAWXG.png) to stop the shade when it reaches the desired position. - ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-7QL5RPH1.png) shows the opening percentage (if supported). - Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-2K10WBWH.png) or ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-G9BWMIDJ.png) to fine-tune the slat angle (if supported)**.** ![screen (30)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-l683gadf.png) - Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-OQGFMR0F.png) > ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-3QNAHF1O.png) to access advanced settings. Note that available functions may vary depending on the shade model: ![screen (68)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-nt4sbg08.png) - **Shade Calibration:** Adjust the opening and closing duration of the curtain. Follow the onscreen instructions to calibrate. - **Shade Reversal**: Reverse the direction of curtain movement if the open and close buttons operate in the opposite direction. - **Shade Type**: Set the type of shade or blind. - **Position Micro-adjustment:** Fine-tune the fully open and fully closed positions of the shade. - **Angel Micro-adjustment:** Fine-tune the slat angle of venetian blinds to achieve the desired opening angle. ### ### Speaker When used as a **gateway**, HyPanel Elite 7 can control supported third-party speakers. To control a speaker, go to the Media screen and tap the corresponding device card. ![screen (66)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-sub8hfxv.png) ![screen (31)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-q9psbwvr.png) ## Group control devices HyPanel Elite 7 enables convenient one-touch control for individual spaces or entire device categories. It supports grouped lighting management and multi-control associations to synchronize device states across linked devices. ### ### One-touch device control On the upper right of some feature screens (e.g., Lights and Electric screens), tap the control buttons to turn all devices of the same type on or off at once. ![screen (63)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-0jh46bs3.png) ### Lighting group control When HyPanel Elite 7 is used as the **home center**, it supports the lighting group control feature, allowing you to group multiple lights and control them simultaneously. This makes it easy to adjust brightness, color, and power status across different areas within the same room. > [!NOTE] > **NOTE:** > > - The device group should be created using the BelaHome app (Go to the home page, tap any desired device ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-IGQTV27L.png) > **Device Group**, and add devices into the group). Once created, a group card will appear in the Lights screen for easy one-touch access. > - **Group Control Capabilities** > - Devices with the same capabilities (e.g., RGB lights) will display those capabilities for the entire group. > - Devices with different capabilities will only display the common capabilities in the group. For example, if a switch light and a dimmable light are grouped, only the switch capability will be shown. > > ![screen (65)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-xm8ffxcp.png) ### Multi-control association When HyPanel Elite 7 is used as the **home center**, it supports the multi-control association feature. This feature links switches and lights to keep their on/off states synchronized. When one device changes state, all associated devices update accordingly. For example, if multiple switches control the same light, associating them ensures they reflect the same on/off status. > [!NOTE] > **NOTE:** > > - The multi-control should be created using the BelaHome app (Go to the home page, tap any desired device ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-27O9JBTB.png) **> Multi-control association**, and link the desired devices). ## ## Use the intercom ### Unlock door remotely When you know who is at your door, you can open the door directly without communicating with the door phone. 1. Tap **Security**. 2. Find the desired door phone, and do any of the following: - Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-AS3AJE5L.png) to open the door directly. - Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-VAFJFVAQ.png) to view the live video feed. ![screen (55)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-4h1q7j99.png) - Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-9XL09943.png) for control screen. ![screen (56)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-lv9hx80d.png) > [!WARNING] > **TIP:** > > If multiple doors are connected to the door phone, a pop-up list will let you select which one to open. > > ![screen (58)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-dj8h5e37.png) ### Unlock door before answering a call When you receive a call from the door phone with a camera, you can preview its monitoring streaming and open the door without answering the call. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-3ZOTPRPB.png) ### Unlock door during a call You can answer the door phone call and unlock the door during the call. To unlock the door, tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-Q0X8UP4K.png). To zoom in the monitor streaming screen, tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-2C9RPEGM.png). ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-WMEBEEVK.png) You are also able to go to the **Contacts** screen and call the door phone to see and hear who the visitor is. ### ### View monitoring feed If the connected door phone has a camera, you can view its monitoring stream without making a call. - To see the feed, find the desired door phone, and tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-4FWFJMYW.png). ![screen (55)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/cd-image-w73kpdgt.png) - Tap the icon ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-BEZ04ZSI.png) in the upper right corner to switch between available camera feeds. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-SS9KQ184.png)