---
title: "Control Relays of HyPanel Using other KNX Devices"
slug: "control-relays-of-hypanel-using-other-knx-devices"
updated: 2024-10-28T03:17:54Z
published: 2024-10-28T03:17:54Z
canonical: "knowledge.akuvox.com/control-relays-of-hypanel-using-other-knx-devices"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Control Relays of HyPanel Using other KNX Devices

You can control the relays connected to a HyPanel using other KNX devices, with each relay operated by a separate button. The configuration process includes:

- Configuring buttons to control the relays
- Creating group addresses
- Linking group objects of relays with their group addresses

In this example, we’ll use HyPanel A control the two relays of HyPanel B.

> [!NOTE]
> **Note**
> 
> We’re using HyPanel A to represent other KNX panels as control devices for demonstration purposes. In reality, HyPanels within the same family can directly control each other’s relays without any extra steps.

## **Configure buttons to control relays**

In this example, we’ll set up the button parameters on HyPanel A’s Home page and Function page.

> [!NOTE]
> **Note**
> 
> The steps for configuring control buttons on KNX devices vary by manufacturer, so check the specific instructions for your devices.

> [!WARNING]
> **Tip**
> 
> For detailed instructions on configuring HyPanel pages, see the “Configure Parameters of HyPanel” section in [this guide](https://knowledge.akuvox.com/docs/configure-knx-devices-parameters).

1. In ETS, select the **Parameter** tab for HyPanel A. Click on the **Home page**, enable the desired home page, and set up the layout (button numbers), associated function (linked function page) and icon number.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/control-relays-of-hypanel-using-other-knx-devices-image-z2oei9o1.png)

1. Go to **Function page > Page setting**, and enable the desired page. Note that the first five are multi-function pages.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/control-relays-of-hypanel-using-other-knx-devices-image-s258zaou.png)

1. On the enabled page, set the number of function icons, and configure the displayed names, icons, and functionalities for the two relay buttons.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/control-relays-of-hypanel-using-other-knx-devices-image-6hw54x7s.png)

## **Create group addresses for relays**

1. Open the Group Addresses panel by clicking **Panels > Group Addresses**.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/control-relays-of-hypanel-using-other-knx-devices-image-xvwm3u1e.png)

1. Right-click the Group Addresses, add corresponding level groups, and name them. Here, we create “on/off” and “status” group addresses for each relay.

> [!WARNING]
> **Tip**
> 
> You can customize the structure to suit different types of KNX projects. In this guide, we’ll use the following structure:
> 
> - Main group: Building part (1st floor, living room...)
> - Middle group: Function (Curtain control, dimming...)
> - Subgroup: Specific function of a device (Open/close, on/off...). Refer to a device’s Object Functions to define its group addresses.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/control-relays-of-hypanel-using-other-knx-devices-image-jmaouxlm.png)

## **Link group objects to group addresses**

Drag and drop the group addresses for the two relays into the corresponding group objects on HyPanel A and HyPanel B.

- For HyPanel B’ s relays

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/control-relays-of-hypanel-using-other-knx-devices-image-zww3ct6y.png)

- For HyPanel A’s control buttons

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/control-relays-of-hypanel-using-other-knx-devices-image-2sw06nx1.png)