--- title: "5. Configure G32 as a Sub-Gateway" slug: "csg" updated: 2026-09-11T10:08:47Z published: 2026-09-11T10:08:47Z canonical: "knowledge.akuvox.com/csg" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # 5. Configure G32 as a Sub-Gateway > [!NOTE] > **NOTE:** > > - Up to 5 G32 gateways can be used in one home: 1 Home Center and up to 4 sub-gateways. > - G32 can be used as a sub-gateway with the following supported HyPanel devices and firmware versions: > - HyPanel Pro (PG71): 71.1.40.197 or later > - HyPanel Ultra (PH81): 281.1.40.153 or later > - HyPanel Supreme (PHX1): 1001.1.40.153 or later > - SmartPanel Elite 10 (PH58): 119.1.40.115 or later > - SmartPanel (X933H): 933.1.40.116 or later ## 5.1. G32 via Ethernet 1. Connect your mobile phone and G32 to the same network as the Home Center. 2. Log in to the existing family administrator account in the BelaHome app. 3. Tap **Home > +**. 4. Press and hold the G32 button until the green indicator flashes slowly and you hear a beep. 5. Scan for the G32, select the detected device and tap **Next**. ## ## 5.2. G32 via Wi-Fi 1. Turn on your phone’s Bluetooth. 2. Log in to the BelaHome app with the family administrator account. 3. Tap **Home > + > G32**. 4. Press and hold the button on the G32 until the green indicator flashes slowly and you hear a beep. 5. Wait for the G32 to be detected. Select the discovered G32 and tap **Next**. 6. Select a Wi-Fi network, enter the password, and tap **Next**. > [!WARNING] > **TIP:** > > To change G32’s Wi-Fi network, go to **Category > More > [G32 device card] >** ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-EFSWXZ16.png) **> Wi-Fi Setting**, then follow the onscreen instructions. ## 5.3. Remove G32 1. Find the G32 device card on the panel or the BelaHome app. 2. Go to the G32 on the device details page, and delete it. 3. Factory reset the G32. 4. Verify the G32 MAC address is removed from the distributor MAC Library.