--- title: "Debug" slug: "debug-16" status: "update" updated: 2026-11-06T06:37:29Z published: 2026-11-06T06:37:29Z canonical: "knowledge.akuvox.com/debug-16" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Debug ## System Log System logs can be used for debugging purposes. To set it up, go to **Upgrade > Advanced > System Log** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-9D9H5AVH.png) - **Log Level:** Select log levels from 1 to 7 levels. You will be instructed by Akuvox technical staff about the specific log level to be entered for debugging purposes. The default log level is 3. The higher the level is, the more complete the log is. - **Export Log:** Click the Export tab to export a temporary debug log file to a local PC. - **Remote System Server:** Set the remote server address to receive the device log. The remote server address will be provided by Akuvox technical support. ## PCAP PCAP is used to capture the data package going in and out of the devices for debugging and troubleshooting purposes. Set it up on the **Upgrade > Advanced > PCAP** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-MD6MIF8H.png) - **Specific Port:** Select the specific ports from 1-65535 so that only the data packet from the specific port can be captured. You can leave the field blank by default. - **PCAP:** Click the Start tab and Stop tab to capture a certain range of data packets before clicking the Export tab to export the data packets to your Local PC. ## Web Call The web call feature allows for making calls via the device’s web interface, commonly used for remote call testing purposes. To set it up, go to the **Intercom > Basic > Web Call**. Select the registered SIP account, enter the IP/SIP number, and click Dial Out to make the call. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-WZWEGH6V.png) ## Remote Debug Server When the device is having a problem, you can use the remote debug server to access the device log remotely for debugging purposes. To set it up, go to the **Intercom > Advanced** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-5ZTWS41D.png) - **Connect Status**: Display the connection status between the device and the server. - **IP**: Enter the IP address of the server. - **Port**: Enter the port of the server.