---
title: "Debug"
slug: "debug-23"
updated: 2023-12-14T06:59:16Z
published: 2023-12-14T06:59:25Z
canonical: "knowledge.akuvox.com/debug-23"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Debug

## System Log for Debugging

System logs can be used for debugging purposes.

you can set up the function on the web **Upgrade > Advanced > System Log** interface.

![akuvox-it83-series-indoor-monitor-administrator-guide-202211-image-enx1z02w.jpg](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akuvox-it83-series-indoor-monitor-administrator-guide-202211-image-enx1z02w%281%29.jpg)

**Parameter Set-up**:

- **LogLevel:** select log levels from 1 to 7 levels. You will be instructed by Akuvox technical staff about the specific log level to be entered for debugging purpose. The default log level is 3, the higher the level is, the more complete the log is.
- **Export Log**: click the **Export** tab to export the temporary debug log file to a local PC.
- **Export Debug Log**: click the **Export** tab to export debug log file to a local PC.
- **Remote System Log**: select **Enable** or **Disable** if you want to enable or disable the remote system log.
- **Remote System Server**: enter the remote server address to receive the device. And the remote server address will be provided by Akuvox technical support.

## PCAP for Debugging

PCAP is used to capture the data package going in and out of the devices for debugging and troubleshooting purposes.

You can set up the PCAP on the device web **Upgrade > Advanced > PCAP** interface properly before using it.

![akuvox-it83-series-indoor-monitor-administrator-guide-202211-image-l1pxt9kd.jpg](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akuvox-it83-series-indoor-monitor-administrator-guide-202211-image-l1pxt9kd%281%29.jpg)

**Parameter Set-up**:

- **Specific Port**: select the specific ports from 1-65535 so that only the data packet from the specific port can be captured. You can leave the field blank by default.
- **PCAP**: click **Start** tab and **Stop** tab to capture a certain range of data packets before clicking **Export** tab to export the data packets to your Local PC.
- **PCAP Auto Refresh**: select **Enable** or **Disable** to turn on or turn off the PCAP auto fresh function. If you set it as **Enable** then the PCAP will continue to capture data packets even after the data packets reached their 50M maximum in capacity. If you set it as **Disable** the PCAP will stop data packet capturing when the data packet captured reaches the maximum capturing capacity of 1MB.

## User Agent

User agent is used for identification purpose when you are analyzing the SIP data packet.

![akuvox-it83-series-indoor-monitor-administrator-guide-202211-image-5ybd4o8t.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akuvox-it83-series-indoor-monitor-administrator-guide-202211-image-5ybd4o8t%281%29.png)

## Screenshots

You can take a screenshot of the specific device screen to help with the troubleshooting and so on.

To take screenshots, go to **Upgrade > Advanced > Screenshots**, then click **Screenshots**.

![akuvox-it83-series-indoor-monitor-administrator-guide-202211-image-3pa5pvms.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akuvox-it83-series-indoor-monitor-administrator-guide-202211-image-3pa5pvms%281%29.png)