--- title: "Debug" slug: "debug-46" updated: 2026-08-19T09:01:57Z published: 2026-08-26T06:09:12Z canonical: "knowledge.akuvox.com/debug-46" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Debug ## System Log for Debugging System logs can be used for debugging purposes. Set it up on the web **System > Maintenance > System Log** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-SL69TPFH.png) - **Log Level**: Select log levels from 1 to 7. You will be instructed by Akuvox technical staff about the specific log level to be entered for debugging purposes. The default log level is **3**. The higher the level is, the more complete the log is. - **Export Log**: Click the **Export** tab to export a temporary debug log file to a local PC. - **Remote System Server**: Set the remote server address to receive the device log. The remote server address will be provided by Akuvox technical support. ## PCAP for Debugging PCAP is used to capture the data package going in and out of the devices for debugging and troubleshooting purposes. Set it up on the web **System > Maintenance > PCAP** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-XA6DRYB7.png) - **Specific Port**: Select the specific ports from 1-65535 so that only the data packets from the specific port can be captured. You can leave the field blank by default. - **PCAP**: Click **Start** and **Stop** to capture a certain range of data packets before clicking the **Export** tab to export the data packets to your Local PC. - **PCAP Auto Refresh Enabled**: If it is enabled, then the PCAP will continue to capture data packets even after the data packets reach their 1M maximum capacity. If it is disabled, the PCAP will stop data packet capturing when the data packet captured reaches the maximum capturing capacity of 1MB. ## Remote Debug Server When the device is having a problem, you can use the remote debug server to access the device log remotely for debugging purposes. Set it up on the **System > Maintenance > Remote Debug Server** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-9JSDOQWA.png) - **Connection Status**: Display the connection status between the device and the server. - **IP Address**: Enter the IP address of the server. - **Port**: Enter the server port. ## Ping The device allows you to verify the accessibility of the target server. Set it up on the **System > Maintenance > Ping** interface. Click **Ping** to start the detection, and the results will display on the web. You can click **Export** to download the report. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-LNSD5EMM.png) - **Cloud Server**: The server to be verified. - **Verify the network address accessibility**: The service type includes TCP connection, FTP service, SIP service, etc. You can select the service type or enter it manually.