---
title: "Device Integration with Third Party"
slug: "device-integration-with-third-party-5"
updated: 2023-12-15T02:25:26Z
published: 2023-12-15T02:25:26Z
canonical: "knowledge.akuvox.com/device-integration-with-third-party-5"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Device Integration with Third Party

## Enter Applications Screen

The indoor monitor supports **User** and **Admin** modes. In Admin mode, you can access both the third-party and default applications.

To do the configuration on device **Settings > System Info** screen. You can press on **User Mode** 10 times and press **Admin Mode**, and then **Confirm**.

![akuvox-c315-indoor-monitor-administrator-guide-202209-image-gg47ctnk1.jpg](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akuvox-c315-indoor-monitor-administrator-guide-202209-image-gg47ctnk%281%29%281%29.jpg)

![akuvox-c315-indoor-monitor-administrator-guide-202209-image-ut587834.jpg](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/akuvox-c315-indoor-monitor-administrator-guide-202209-image-ut587834%281%29.jpg)

## Install Third-party App

You can install the third-party app to your device on the device web **Phone > App** interface. Choose a suitable .apk file from the PC to upload.

![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87-JFN0EBX9.png)

To configure the installed third-party app on the web **Phone > Key/Display > Third Party APK Control** interface, you can click **App Name** to select the installed APK files for configuration. Then, enable or disable each field for the specific configuration you need.

![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87-STWSGA6J.png)

**Parameter Set-up**:

- **App Name**: select the app to be configured.
- **Interval Without Operating (Sec)**: enable it to set the app returning time interval when there is no operation on the device.
- **Start Up Enable**: enable it if you want the app to run automatically when the device is turned on.
- **Turn Back App After Awakening**: enable it if you want the device to return to the app when the screen is awakened.
- **APP Keep-Alive** : enable it if you want the app to stay running without being turned off.
- **Turn Back App After Calling**: enable it if you want the app to return automatically after finishing a call (this feature applies to all the apps).
- **Show App Icon**: enable it if you want the app icon to be displayed on the screen.

## Smart Living Setting

You can control the home sensor through an HTTP command on the device web **Phone > Smart Living** interface.

![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87-Q1YH6I71.png)

**Parameter Set-up**:

- **Status**: enable or disable this button. If disabled, the button will not appear on the home control page.
- **Icon**: select **Scene** or **Light**. If **Scene** is selected, the icon is displayed as a scene icon. Select **Light**, the icon is a light icon.
- **Label**: it is used to customize the button display name.
- **HTTP command**: set up the HTTP command to trigger the sensor.

          Note

          

- To configure Smart Living button on **Phone > Key/Display** interface.

![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87-IEEMCAVS.png)

## Display Third-party Webpage after Booting Up

If you want the device screen to go to any third-party servers or the third-party webpage after the device's boot-up, you can type in their URL.

To set it up, you can go to **Phone > Web View > URL**.

![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87-WRCKZ0OM.png)

## Third-party Integration via API

To allow the third-party devices to integrate with the indoor monitor, you need to set up API authentication by setting up a username and password. You also need to select the authentication code for the API-based integration.

To set the API authentication, go to **Security > API** interface.

![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87-YMO46VQY.png)

**Parameter Set-up**:

- **API**: enable the API if you allow the device to be integrated with the third-party devices via API.
- **Auth Mode**: select the authentication mode.
  - **Allowlist**: select it when you only allow the device in the allow list to integrate with the indoor monitor.
  - **Digest**: select it when you apply the **Digest** mode for the third-party integration.
  - **None**: select none if all the devices are allowed to integrate with the indoor monitor with all forms of the authentication mode.
- **User Name**: type in the username used for the authentication.
- **Password**: type in the password used for the authentication.

Before the API integration, you need to enable the API permission and create allow list by entering the location and IP address of the device to be integrated with the indoor monitor.

To set it up, go to **Security > Allowlist** interface.

![Screenshot 2023-10-07 1557111.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/Screenshot%202023-10-07%20155711%281%29.png)