--- title: "Integration with Third-party Devices" slug: "device-integration-with-third-party-7" updated: 2025-02-06T08:09:41Z published: 2025-02-06T08:33:47Z canonical: "knowledge.akuvox.com/device-integration-with-third-party-7" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Integration with Third-party Devices ## Smart Living Setting You can control the home sensor through an HTTP command. To set it up, go to the web **Device > Smart Living** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-ZTVMU7V5.png) - **Status**: Enable or disable this button. If disabled, the button won't appear on the home control screen. - **Icon**: If **Scene** is selected, the icon is displayed as ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-MNIV4VED.png). If **Light** is selected, the icon will be ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-Z6FQYBSX.png). - **Label**: Customize the button display name. - **HTTP command**: Set the HTTP command to trigger the sensor. > [!NOTE] > Note > > To configure Smart Living button, go to the **Device > Display Setting** web interface. ## Integration with Control 4 You need to enable the Control 4 mode before you can integrate the device with the Control 4 home center. To enable it, go to **Network > Advanced > Connect Setting** mode. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-FMDL2UTQ.png) > [!NOTE] > Note > > Click [here](https://knowledge.akuvox.com/docs/about-this-manual-34) to view the detailed integration steps with Control4. ## Integration via External Relay Users can control akubela or third-party smart home devices on the indoor monitor through an external relay controller. To set it up, go to **Device > External Relay** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-62KC3844.png) - **External Relay Type**: Select the external relay type. - **External Relay Mode**: Set the external relay mode based on its connection with the indoor monitor. - **Status**: Enable/disable the relay. - **Relay Function**: Set the relay function based on the smart home devices connected. - **Hold Delay**: Specify the relay reset time from 1 to 60 seconds. **Never** means it keeps activated once it is triggered. By default, it is 3 seconds for Door and Others relay functions and Never for other functions. - **Display Name**: Set the tab’s name displayed on the indoor monitor’s External Relay screen. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/screenshots (6)(1).png) > [!NOTE] > Note > > - To display the External Relay button on the home screen, set it up on the **Device > Display Setting** interface. > - Click [here](https://knowledge.akuvox.com/docs/configure-external-relays-connected-to-indoor-monitors) to view the detailed configuration of the external relay feature.