---
title: "Device Integration with Third Party Device"
slug: "device-integration-with-third-party-device-1"
updated: 2025-01-09T10:23:40Z
published: 2025-01-16T07:55:57Z
canonical: "knowledge.akuvox.com/device-integration-with-third-party-device-1"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Device Integration with Third Party Device

## Smart Living Setting

You can control the home sensor through an HTTP command.

To set it up, go to the web **Device > Smart Living** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-PIGEUZ7D.png)

- **Status**: Enable or disable this button. If disabled, the button won't appear on the home control page.
- **Icon**: Select the preferred icon image.
- **Label**: Customize the button display name.
- **HTTP Command**: The HTTP command to trigger the sensor.

> [!NOTE]
> Note
> 
> Set the Smart Living button to be displayed on the **Device > Key/Display** interface before using this feature.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1736418116342.png)

## Integration with Control 4

You need to enable the Control 4 mode before you can integrate the device with the Control 4 home center. To enable it, go to **Network > Advanced > Connect Setting** mode.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-WV3DJK2J.png)

> [!NOTE]
> Note
> 
> Click [here](https://knowledge.akuvox.com/docs/about-this-manual-34) to view the detailed integration steps with Control4.