--- title: "Device Management" slug: "device-management" updated: 2026-08-07T03:40:47Z published: 2026-08-07T03:40:47Z canonical: "knowledge.akuvox.com/device-management" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Device Management ## View Device Status ### Offline Status Devices that are offline are indicated by an icon in the upper-right corner of a device card. - In any specific room view, all offline devices are listed under **Offline** tab for easy identification. - Offline devices cannot be controlled via the app. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-tl1cswnx.png)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-12hk4f4n.jpg) ### ### Active (Turned-On) Status The app provides visual indicators to help you quickly identify and access active devices. #### On the Home Screen - When a device (e.g., a light or air conditioner) is turned on, a corresponding **Type Button** appears at the top of the **Home** screen. This button displays the exact number of devices of that type currently active. - Tap the button to quickly navigate to the corresponding category screen for detailed control. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-sgrus4b8.png)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-2lyhqc3n.jpg) These quick-access buttons are automatically removed from the Home screen when all devices of that type are turned off. #### In the Room View When any device is turned on, an orange dot appears below its corresponding device-type icon. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-p11fvk0z.png) ## Check Notifications and Logs ### Online/Offline Notifications You will receive a notification when a device’s connection status changes. To view or delete notifications, go to **Home** > ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-AYYT9XCF.png) > **Notification.** ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-yhd47lxg.png)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-xzqfxnob.jpg) ### Device Logs For Zigbee devices (locks, sensors, switches, etc.), tap the device card **>** ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-BB6ISWBH.png) **> Device Log** to view activity history and operator. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-toeutb1z.png)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-2snf1mbc.png) ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-jtzy4o9t.png) ## ## Check Device Battery For devices that report battery status: - Go to **Me > Battery status** ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-tzefj1at.jpg) - Go to ***[specific device card]* > Battery.** ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-rcu2dxnu.png) ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-2m7oxfmg.png) ## ## Add Devices Administrators and Managers can add Zigbee and compatible third-party devices. ### ### Add Zigbee Devices 1. Go to **Home** , then tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-RZ3ZWYQO.png) in the upper right corner. 2. Select the desired Gateway. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-3sayw0fg.png)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-dsqa3ffj.png) 1. Put the device in pairing mode. > [!WARNING] > **TIP:** > > - Place devices close to the gateway (ideally in the same room; within 10 meters if separated by a wall). > - Multiple devices can be added at once. 1. Wait for detection, then select device(s). ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-5v0mz85x.jpg) 1. Set the device name and location for each device, then tap **Finish**. > [!WARNING] > **TIP:** > > Use on/off control (if available) to confirm correct device mapping. > > ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-rfl30ifp.jpg) ### Add Third-Party Devices > [!NOTE] > **NOTE:** > > HyPanel Lite does not support adding third-party devices. 1. Tap **Home >** ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-12J2XQXU.png) . 2. Select the desired Gateway. 3. Choose the device type from the provided list. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-0f95276u.jpg) 1. Follow the onscreen instructions and the device manual. 2. Set the device location and name, then tap **Done**. ## ## Configure Devices ### Change Relay Type for HyPanels Customize how the physical relays on your HyPanel function (e.g., changing a switch to a shade controller). 1. Go to **Room** screen or **Category > More**. 2. Select the panel card and tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-ZAVWBJ72.png) in the upper right corner. 3. Tap **Relay 1/2** and choose a new type. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-ik9acpvf.png)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-e65e3a1p.png) > [!NOTE] > **NOTE:** > > - Heating + Cooling relays appear as a thermostat. > - For shades: Relay 1 = Open, Relay 2 = Close (reverse the Shade Direction in their Settings if wiring is reversed). ### Bypass Sensors Temporarily disable sensors to prevent false alarms in scenarios such as maintenance. To bypass: 1. Go to **Room** or **Category > Security > All Devices**. 2. Select a sensor. 3. Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-PIWXLLHZ.png) > **Bypass**. 4. Set a duration and tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-LRBXNI9C.png) to confirm. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-xjl4zfjs.png)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-71v857oj.png) **Quick access:** Go to **Category > Security > Zone** to malfunctioned or bypassed sensors or bypass/unbypass all sensors at one touch. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-8lt0kg2s.png) ### Change Device Location To move a device (except for wired sensors) to a different room: 1. Go to **Room** or **Category**. 2. Select the device card. 3. Tap ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-IKBWCSQF.png) in the upper right corner. 4. Tap **Space**, and select a new room. 5. Tap **Save**. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-q0996bg8.jpg)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-izdcsnq9.jpg) ### Change Device Icon Personalize icons for lights, AC, and ventilation. > [!NOTE] > **NOTE:** > > Supported only when the home center is running version 4.0.1 or later. 1. Go to **Room** or **Category**. 2. Tap ***[specific device card]*** **>** ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-F7RRL1HL.png) **>** **Change Icon.** 3. Select a new icon and tap **Done**. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-5z446w3o.png)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-4grhx3tn.png) ### Remove a Device To remove a damaged or offline device, tap ***[specific device card]* >** ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-S4WN6L8N.png) **> Delete**. > [!NOTE] > **NOTE:** > > This will permanently delete all device data and configurations. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-98uokyjo.jpg) ### Restrict Device Editing To prevent accidental changes by setting a 6-digit PIN: 1. Go to **Me > Setting > Authorization Management**. 2. Toggle on **Device Management Password**, and set your PIN. 3. Tap **Save**. Once enabled, some setting changes including relay type modification and device deletion, will require the PIN. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-u1kh27of.jpg)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-vj0a4pvd.jpg) ## Control Devices ### One-Tap Control Quickly control all devices of the same type in a specific room or across the entire home: - **By Room** In the **Room** view, long press a device-type icon. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-fu68wi8f.png)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-zxl8fbtz.jpg) - **By Category** In the **Category** view, do the following: - Tap **All On**/**All Off** to control all devices of the selected type across all rooms. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-jb4d8vn5.png) - Tap a device type to open the details screen, select a room, and use the control button to turn devices on or off. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-p9sbus7d.png) ### ### Group Control You can group multiple lighting devices and switches to control them together. > [!NOTE] > **NOTE:** > > Only shared features are available within a group. For example, grouping a switch light and a dimmable light will only show the switch function. To customize a group and manage it: 1. Tap ***[specific device card]* >** ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-V5BKIMH7.png) **> Device Group > Add New Group**. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-fkzqkjl0.png) ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-bxhelggy.jpg) 1. Tap **Add device** to include devices in the group. You can filter devices by name. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-hn2qoonq.jpg) ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-h7rqumyf.jpg) 1. Name this group. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-yt8g6p2t.jpg) Once completed, the group will appear on the **Room** or corresponding **Category** screen. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-nnoffh7c.png) ### Scheduled Control > [!NOTE] > **NOTE:** > > - Supported only when the home center is running firmware with version 4.0.1 or later. > - This feature is available for switches, sockets, and thermostats. > - Up to 30 timers are supported for a single device. 1. Select a device. 2. Tap the timer icon. 3. Set countdown time if needed. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-dawjbc74.jpg)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-6cwbei9w.png)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-1dknwm9f.png) 1. Tap **Add**, and select **Schedule On Time** or **Schedule Off Time.** 2. Set schedule and repeat. 3. Tap **Save**. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-r9hx4g24.jpg) ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-8y7efthg.jpg) After adding: - Toggle to enable/disable. - Long press to edit/delete. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-apztxk12.png)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-5slzu5ea.png) ### Multi-Control Association Link switches and lights to keep their on/off states synchronized. When one device's state changes, the associated devices will follow. For example, if multiple switches control the same light in a room, you can associate them so that their on/off states remain the same. 1. Go to ***[specific device card]* >** ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-TWJ7TNKY.png) **> Multi-Control Association**. 2. Tap **Link with devices** to select devices. You can filter devices by name. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-xapsvctg.png)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-xjjnb5o1.png)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-2o2cnxfm.jpg) ### Control a Single Device - Tap the on/off button on the device card for quick control. - Tap the device card to access advanced controls (e.g., brightness, color). ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-0tygf2ym.png)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-586hdzlq.jpg) ## Update Devices Check and install firmware updates for akubela devices including panels and smart locks > [!NOTE] > **NOTE:** > > Requires cloud connection to receive updates from the cloud server. 1. Go to **Me >** **About > Check device updates.** 2. Tap **Update** to begin the download and installation if a new version is available. ![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-7kqek0z5.png)![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/device-management-image-zbc7r7il.png)