--- title: "Device Management" slug: "dm-1" updated: 2026-08-17T07:34:22Z published: 2026-08-17T08:49:52Z canonical: "knowledge.akuvox.com/dm-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Device Management You can manage all devices in projects under your and your installers’ accounts. This includes adding, replacing, and deleting devices for projects you’ve created, adding MAC addresses, downloading device list and more. ## ## Manage Your MAC Library The MAC Library on the akubela Cloud contains all smart home device MAC addresses associated with your and your installer accounts. To view MAC addresses of Akuvox intercom devices, go to the SmartPlus Cloud or access the related projects. ### ### MAC Registration Methods There are two methods for managing MAC address entries: - **Method A (Default):** MAC address registration is not required. Installers can add or remove devices directly. - **Method B:** If MAC Control is enabled for your account by the akubela support team, all device MAC addresses must be registered in the MAC Library in advance. Installers can only add devices that are registered under your account. > [!NOTE] > **NOTE:** > > Under Method B, smart home devices must be registered via the akubela Cloud, not the Akuvox SmartPlus Cloud. ### ### Add MAC Addresses If Method B is enabled, you must register device MAC addresses in advance. 1. Go to **MAC Library** interface. 2. Do any of the following. - To add individually: Click **Add**, and enter the MAC address. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-uvvqrfck.png) - To import in bulk: 1. Click **Import**. 2. **Download the Template** and fill in all MACs. 3. Click **Upload** to import the completed template file. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-craeag1h.png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-5hkktbiq.png) ### Delete MAC Addresses To remove a MAC address: Go to the MAC Library, locate the address, and click **Delete**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-mne8zu5a.png) ## Add Devices in Single-Tenant Projects You can add akubela panels and door phones when creating or editing your single-tenant projects. ### ### Add akubela Panels 1. Go to **Projects > Single-tenant > Detail > Layout**, then click **Device > Smart Home Devices > Add**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-3oxa0lzl.png) 1. Configure the device as follows: ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-6kq7c714.png) | **Configuration** | **Description** | | --- | --- | | Product Model | Must match the panel’s actual flush-mounted module, or it won’t connect to the cloud. | | Product Name | Populated automatically. | | Device | - Home Center: Only one per home. Central hub for all automation. - Sub-Gateway: Supports ZigBee devices (except CT61-PoE). | | Device | Enter a device name. | | Location | Specify where the device is installed. | | Relay | Select if applicable (not all models support this). | ### ### ### Add Door Phones 1. Go to the SmartPlus Cloud. 2. Go to **MAC Library > New** to add door phone MAC addresses. 3. Return to the akubela Cloud. 4. Go to **Projects > Single-tenant > Detail > Layout** > **Doorphone**, then click **Add**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-otadmbpp.png) 1. Configure the door phone: ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-fntdsnjy.png) | **Configuration** | **Description** | | --- | --- | | Device Type | Choose single-tenant or multi-tenant. | | Device MAC | Must exist in the SmartPlus Cloud MAC library. | | Does this device have Internet access | If connected to LAN, enter IP address. | | Device Name | Enter a device name. | | Relay Toggle | Enable/disable relay control. | | Relay Name | Name the relay controlled by the door phone. | | DTMF Code | Set a DTMF code for door unlocking. | | Add Relay/Security Relay | Add additional relays if needed. | ### Add Cameras 1. Go to **Projects > Community/Single-tenant > Detail > Layout**, then click **Device > Camera > Add**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-494su6m2.png) 1. Configure the camera: ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-389zk2z2.png) | **Configuration** | **Description** | **Remark** | | --- | --- | --- | | Device Name | Name the camera. | | | RTSP Address | Enter the RTSP URL for the live video stream. | Follow the formats under the input field. | | Username | Enter the camera’s username. | | | Password | Enter the camera’s password. | | | Does this device have internet access | Select whether the camera is connected to the internet. - Yes - No | When the camera does not have internet access, it must be on the same LAN as the home center. | ## ## Replace Devices > [!NOTE] > **NOTE:** > > If you have not backed up the data, replacing a device will erase all data stored on it. > [!WARNING] > **TIP:** > > For detailed instructions on replacing devices, > > - Home center: See [here](https://knowledge.akuvox.com/docs/backup-and-replace-home-center-device). > - Sub-gateway: See [here](https://knowledge.akuvox.com/docs/backup-and-replace-sub-gateway-device). ### ### Replace akubela Panels - If the panel is not yet installed: Delete the old device from **Project > Single-tenant > Detail > Layout> Device**, and add the new one. - If installed but in **Local Mode:** Not supported. - If installed and connected to **akubela Cloud:** - Replacing **home center** device > [!NOTE] > **NOTE**: > > The new device must be brand-new or factory reset and removed from the cloud. - For the same product model: 1. Disconnect and power off the old panel; Ensure it’s offline. 2. Enter the existing installation code on the new device. 3. Remove the old MAC from the your MAC library. - For a different (or same) product model: 1. Disconnect and power off the old panel; Ensure it’s offline. 2. Go to **Project > Single-tenant > Detail > Layout > Device > Smart Home Devices > Replace**, and enter the new device’s MAC. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-m0sr6tmk.png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-r5rhzybv.png) 1. Factory reset the old panel. 2. Connect the new home center to the Internet, and complete initial setup in Local Mode. 3. Remove the old MAC from your MAC library. - Replacing a **gateway** device 1. Enter the existing installation code on the new (same-model) device. 2. Remove the old MAC from your MAC library. ### ### Replace Door Phones 1. On the SmartPlus Cloud, add the new door phone’s MAC address to your MAC library, and remove the old one’s. 2. On the akubela Cloud, go to **Project > Single-tenant > Detail > Layout > Device > Doorphones**, and click **Edit**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-53pzhn9a.png) 1. Modify the MAC and other settings. ### ### Replace Cameras Go to **Project > Single-tenant > Detail > Layout > Camera > Edit**, and change the settings. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-bacaeemw.png) ## ## Delete Devices ### Delete akubela Panels - If panels are not installed Go to **Project > Single-tenant > Detail > Layout > Device**, and click **Delete.** ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-dldfuxk6.png) - If installed but in **Local Mode** - **Home center**: Cannot be deleted. - **Gateways**: Via BelaHome app, the device portal, or the user portal. - If installed and connected to **akubela Cloud** - **Home center**: Cannot be deleted. - **Gateways**: 1. Go to **Project > Single-tenant > Detail > Layout> Device**, find the desired gateway device, and click **Delete.** 2. Remove its MAC from your MAC library. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-jwgy600d.png) ### Delete Door Phones 1. On the akubela Cloud: Go to **Project > Single-tenant > Detail > Layout > Doorphone > Delete**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-z19n1fq2.png) 1. On the SmartPlus Cloud: Remove the device’s MAC address from your MAC library. ### ### Delete Cameras Go to **Project > Single-tenant > Detail > Layout > Camera > Delete**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-6e3m35rd.png) ## Obtain Installation Codes If you plan to connect akubela panels to the cloud during initial setup using Cloud Installation mode, you’ll need each panel’s unique installation code. > [!NOTE] > **NOTE:** > > Installation codes are available only after a home center device is added to the home layout. If the layout contains only sub-devices, installation codes will not be shown. ### ### Community Projects You can view and export installation codes for individual homes within a community project. To obtain installation codes for a specific home: Go to **Project > Community> Detail > Install**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-me92mpfv.png) You can also: - Click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-ZQVI4TPX.png) to revert to the previous codes compatible with older firmware versions. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-z3fdrs9s.png) - Click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-A5NG6LSF.png) to download an EXCEL file containing this home’s installation codes. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-lkxuf9zn.png) ### ### Single-Tenant Projects To obtain the installation code: Go to **Project > Single-tenant > Detail > Install.** ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-bh6g8nwd.png) You can also: - Click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-YIUD2Z9K.png) to download an EXCEL file containing installation codes. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-GZDG80A7.png) - Click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-A25E4C2G.png) to revert to the previous codes compatible with older firmware versions. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-zih1hs2v.png) ## Batch Configure Devices via AutoP Auto-Provisioning(AutoP) allows you to remotely apply batch configuration settings to cloud-connected devices within projects you have created. This is useful for unified adjustments such as enabling Do Not Disturb (DND) mode or hiding relay configuration options. > [!WARNING] > **TIP:** > > To use this feature, please contact the akubela technical support team to obtain the appropriate configuration file. 1. Go to the **Detail** interface of the desired project, and click **Config**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-8h3csibs.png) 1. Upload the config. file provided by the akubela tech support. 2. Select the **product model**. 3. Choose the devices to which the configuration should be applied. 4. Click **Submit**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-oevmfr9t.png) ## View Device List Go to **Devices > Device List** to view all akubela devices under your and your installers’ accounts. You can use filters to locate specific devices. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-grgbc5jd.png) To see a device’s details including MAC address, SIP number, firmware version, belonged project, network information, and more, click **Info**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-ufha78ue.png) ## ## Download Device List You can download a customized list of devices: 1. Go to **Device > Device List**, then click **Download**. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-wnwre9rb.png) 1. Select the information you want. 2. Choose to download only the current page or the entire list. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/dm-image-3l6lrg3i.png)