---
title: "Download Project Data to HyPanel-KNX"
slug: "download-project-data-to-hypanel-knx"
updated: 2024-09-19T07:07:12Z
published: 2024-09-19T07:07:12Z
canonical: "knowledge.akuvox.com/download-project-data-to-hypanel-knx"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Download Project Data to HyPanel-KNX

To transfer the configured parameters to the KNX devices, you need to configure a connection between PC and HyPanel-KNX, and then perform a download.

## Before getting started

1. Have a KNX USB Interface prepared for the local USB connection.

> [!NOTE]
> **Note**
> 
> At this time, HyPanel-KNX does not support direct connection to KNX bus over IP and can not function as a KNX IP router.

1. Connect the USB Interface to both your PC and KNX bus (as shown in the figure below).

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-XGY8D52J.png)

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-216H6MV9.png)

## **Perform a download**

1. Put the device in programming mode.

- The KNX version of HyPanel:
  1. Swipe down from the top of any screen.
  2. Select ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/download-project-data-to-hypanel-knx-image-lfbttlic.png) **> System Settings > KNX Programming**, and toggle it on.

![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/download-project-data-to-hypanel-knx-image-cht72yet.png)

- The KNX devices such as blind actuators, curtain actuators, and more:
  - Press the programming button on the device.

1. In ETS, click ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/download-project-data-to-hypanel-knx-image-1ht0hlwo.png) to set the bus interface settings.

- Automatic: The default option. ETS will determine the most suitable bus interface to connect to the devices.
- Currently discovered interfaces: USB, IP-routing, and IP-tunneling interfaces that are recognized and displayed automatically by ETS.

![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/download-project-data-to-hypanel-knx-image-o13s6s5a.png)

1. Right-click on the desired device on the left tree view, and select a suitable download option.

| **Download Options** | **Description** | **Programming Mode Required** |
| --- | --- | --- |
| Download All | Download all project data in ETS to the corresponding device. | Yes |
| Partial Download | Download only the parts that were changed in ETS and have not been downloaded before. | No |
| Download Individual Address | Assign individual address to KNX device. | Yes |
| Overwrite Individual Address | Assign individual address to KNX device by overwriting known address. | No |
| Download Application | Download application program into the device. | No |

1. Wait for the download to be completed.

> [!WARNING]
> **Tip**
> 
> If there is a download error, please refer to [this guide](/v1/docs/ets-downloads-failed-on-hypanel-devices) for the solution.