---
title: "Hybrid Wired-Wireless GRMS Solution Configuration"
slug: "ed-hybrid-wired-wireless-grms-solution-configuration"
updated: 2026-02-26T08:32:12Z
published: 2026-02-26T08:32:12Z
canonical: "knowledge.akuvox.com/ed-hybrid-wired-wireless-grms-solution-configuration"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Hybrid Wired-Wireless GRMS Solution Configuration

This guide is intended for: ①Installers setting up device wiring in hotels or rental properties, and ②Hotel managers creating and configuring hotel rooms.

# 

> [!NOTE]
> **NOTE:**
> 
> In this solution, HyPanel Lite (KS41), HyPanel Elite 7 (PG42), and G31 Gateway can function only as sub-gateways.

## Example of Hotel Room Layout and Device Placement Locations

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-abfyujqy.png)

# 

## Before Getting Started

### Obtain Cloud Accounts

- **Installer account:** Obtain this account from your distributor and contact akubela technical support to enable the GRMS permission.
- **GRMS platform account:** Obtain this account from your installer.

### Collect Device information (Model, MAC, etc.)

| **Reception** |
| --- |
|  | **System device** | **Intercom** | **Others** |  |  |  |  |
| **Front Desk** |  |  |  |  |  |  |  |
| **Staff Area** |  |  |  |  |  |  |  |
| **Room** |
|  | **System device** | **Panel** | **Lighting** | **Climate** | **Security** | **Intercom** | **Others** |
| **Entrance** | Smart Lock |  |  |  |  |  | Electronic Doorplate |
| **Hallway** |  | HyPanel Lite(Fan Coil version) HyPanel Pro (PoE version) HyPanel (PoE version) | Switch Module |  | Door/ Window Sensor |  | Key Card Switch |
| **Cabinet** | Switch Actuator |  |  |  |  |  |  |
| **Bathroom** |  |  | Smart Switch |  | Flood Sensor |  |  |
| **Living Room/Bedroom** |  |  | Dimmer Module Switch Module Smart Switch | Curtain Motor |  |  | IR Controller |

## 

### Upgrade Devices

1. Collect device firmware versions

You can use the following table format to record firmware versions:

| **Device** | **Required Version** |
| --- | --- |
| HyPanel Pro | 71.1.38.426 or later |
| HyPanel Lite | 41.1.39.126 or later |
| HyPanel | 51.1.39.426 or later |

1. Upgrade device firmware

a. Download the latest firmware from the [Knowledge Base](https://knowledge.akuvox.com/docs/hypanel).

b. Update the device on the cloud by following the [guide](https://knowledge.akuvox.com/docs/upgrade-akubela-panels).

## 

## Task Overview for Hotel Manager and Staff

| **Tasks for Hotel Manager** | **Tasks for Hotel Staff** |
| --- | --- |
| ![D:/Liv个人文件/条件判断流程图(2).png条件判断流程图(2)](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-wc2cxe0g.png) | ![D:/Liv个人文件/hotal staff流程图.pnghotal staff流程图](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-oiiri5s1.png) |

# 

## **Wiring, Power Supply, and Internet Connections**

### Wiring

#### Switch Actuator R8

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-ucov9ig2.png)

> [!NOTE]
> **NOTE:**
> 
> - The recommended maximum cable length is 10 meters.
> - HyPanel is used as an example in this demonstration.

#### IP-485 Multifunctional Gateway R10

![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-bpsx6u4o.png)

> [!NOTE]
> **NOTE:**
> 
> - When connecting both high-voltage and low-voltage relays, leave one relay channel unused between them.
>   - *Example:* when a low-voltage device is connected to NO1/COM1, the high-voltage device should start from NO3/COM3.
> - If high-voltage relays need to be used, power the Switch Actuator with a 100–240 VAC supply through the L and N terminals. This ensures optimal performance and helps extend the actuator’s service life.
> - HyPanel is used as an example in this demonstration.

### Connect Devices to Power

Refer to the instructions below to power on devices. For other devices, please refer to their user manuals for detailed guidance.

| **Device** | **Operation** |
| --- | --- |
| HyPanel Pro (PG71-PoE-EU) | Powered by PoE ![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-pt6z9iaj.png) |
| HyPanel (PS51-PoE-EU) | Powered by PoE ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-XBIVUTBA.png) |
| HyPanel Lite (Fan Coil Version) | ![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-kmtkttye.png) |
| F2 Lock | Powered by 4 AAA alkaline batteries |
| RS485 Switch Actuator | 12V/2A power adapter connected to the 12V and GND terminals |
| IP-485 Multifunctional Gateway | PoE, 12-24VDC, or 100-240VAC |
| Smart Switch | 100-240V AC power supply |
| Door/Window Sensor | Powered by CR2032 battery |
| Curtain Motor | 100-240V AC power supply |
| IR Controller | 5V/1A adapter+USB cable |
| Flood Sensor | Powered by CR2032 battery |

## 

### Connect Devices to the Internet

Refer to the instructions below to connect devices to the internet.

| **Device** | **Operation** |
| --- | --- |
| HyPanel Pro (PG71-PoE-EU) | Use an Ethernet cable or connect to Wi-Fi |
| HyPanel (PS51-PoE-EU) | Use an Ethernet cable or connect to Wi-Fi |
| HyPanel Lite (Fan Coil Version) | Use an Ethernet cable or connect to Wi-Fi |
| IR Controller | Press the button until green LED flashes slowly |

## 

### Zigbee Devices Pairing

| **Device** | **Operations** |
| --- | --- |
| Door/Window Sensor | Hold reset button for 5s until LED blinks |
| Flood Sensor | Hold reset button for 5-10s until LED blinks |

Refer to the instructions below to put the Zigbee devices into pairing mode. You can refer to [this guide](https://knowledge.akuvox.com/docs/put-zigbee-devices-into-paring-mode) for more devices’ instructions.

## **Project Creation**

### Create a Project on the Cloud

1. Create a community project, then add buildings, homes, administrator email addresses, home center devices, and their MAC addresses.

> [!WARNING]
> **TIP:**
> 
> For detailed instructions on creating a community project, please refer to [this guide](https://knowledge.akuvox.com/docs/create-a-community-project-with-intercom-and-smart-home-features-on-akubela-cloud).

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-nt8de1cb.png)

1. On the project’s Details screen, click on RMS > Add to add the hotel manager(s) and staff accounts.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-z6yiv2vl.png)

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-pwz8eubz.png)

Once created, each manager and staff member will receive an email containing their login credentials and login link.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-ki7cgcey.png)

### Configure Room Settings

1. Use the manager account to log into the GRMS platform.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-302wk09m.png)

1. Configure settings such as room types, staff management, access permissions, alarm settings, and more.

> [!NOTE]
> **NOTE:**
> 
> Community projects created on akubela Cloud automatically sync with the GRMS platform, with all changes (e.g., room names/numbers) updating in real-time across both platforms.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-njt6y39q.png)

1. **Define room type**

Go to **Room Type > New room type**, then set the room type, bed numbers, and maximum occupancy.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-r34oev2y.png)

1. **Add staff members**

> [!NOTE]
> **NOTE:**
> 
> The Staff Management section is accessible only to manager accounts.

Go to **Staff Management > New**, then enter staff name, email address, and phone number.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-sy5cwvm8.png)

1. **Set access permissions:**
  1. Create permission groups. Go to **Card Access > Permission Group > New**, name the group, and set the access rights for rooms and public areas.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-ctinua6e.png)

1. Add access cards. Go to **Card Access > New**. Enter the required information.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-jj5krqjz.png)

1. **Configure alarm notification settings**

Go to **Setup > Alarm Settings**, select the alarm type, and choose one or more notification methods:

- Send notifications to the GRMS system (displayed under **Message > Alarm**).
- Show pop-up alerts directly on the platform.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-rwkvutj3.png)

> **TIP:**
> 
> The door/window alarm allows flexible settings like delay time and activation during checkout only. It alerts staff immediately if a door is left open, reducing security risks.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-2me76lsy.png)

## **Device Configuration**

### Add the RS485 Switch Actuator

1. Log in to the device web portal of the HyPanel that is connected to the Switch Actuator, and go to **Device > RS485 Configuration** to enable RS485 function.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-qxwpewnh.png)

1. Set **Connection Type** to **akubela**.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-ctxkkl8l.png)

1. Name the device, and set the device address.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-0hcuj4u9.png)

> [!NOTE]
> **NOTE:**
> 
> - If multiple switch actuators are used, each device must have a unique address.
> - The address mapping between the actuator (binary) and the web portal (decimal) is as follows:
> 
> | **DIP Switch Number** | 1 | 2 | 3 | 4 | 5 | 6 |
> | --- | --- | --- | --- | --- | --- | --- |
> | **Device Address to be Entered (Binary Value)** | 1 | 2 | 4 | 8 | 16 | 32 |
> 
> - To set the device address, add the values of the DIP switches that are toggled ON, and enter the resulting decimal number on the web portal.
> 
> *Example*:
> 
> If DIP switches 1, 2, and 3 are ON, enter 7 (1 + 2 + 4 = 7) as the device address on the web portal.

#### Configure Electronic Doorplates

**Set Up DND and MUR Indicators**

1. **Enable** the relays connected to the DND and MUR terminals of the electronic doorplate.
2. Rename these relays to **DND** and **Clean** accordingly.
3. Set **Relay Type** to **DND** and **MUR**.
4. Set **Power off Memory** to **OFF**.
5. Set the trigger status **NONC** to **NO**.
6. Save the settings.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-99h7wcp0.png) ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-rpxong2t.png)

**Set Up Doorbell**

1. Enable the **Input** channel connected to the doorbell terminal of the electronic doorplate.
2. Rename the input as **Doorbell**,
3. Set **Input Type** to **Doorbell**.
4. Set the trigger status **NONC** to **NO**.
5. Save the settings.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-1ysjxmuh.png)

#### Configure Guest Room Lighting

1. **Enable** the relay connected to the light.
2. **Rename** the relay as Guest Room Light.
3. Set **Relay Type** to **Light**.
4. Set **Power off Memory** to **OFF**.
5. Set the trigger status **NONC** to **NO**.
6. Save the settings.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-2mns8pop.png)

### Add the IP-485 Multifunctional Gateway

1. Ensure the gateway and the home center device are connected to the same LAN.
2. On the HyPanel Pro, tap **Location**, select a room, and tap **+**. The HyPanel Pro will automatically search for nearby devices.

![_data_code_DOWNLOAD_screen - 2025-10-24T155849.831](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-gax45k9c.png)

After the R10 is added, log in to the home center’s device web portal and click Settings on the R10 device card to configure its connected devices.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-g9cy02jc.png)

#### Configure Electronic Doorplates

**Set Up Check-in Status Indicator**

1. Go to **Device > Relays**, and **enable** the relay connected to the Check-in terminal of the electronic doorplate.
2. Rename the relay as **Check in**.
3. Set **Relay Type** to **Switch.**
4. Set **Power off Memory** to **OFF**.
5. Set the trigger status **NCNO** to **NO.**
6. Save the settings.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-naierhbq.png)

**Set Up DND and MUR Indicators**

1. **Enable** the relays connected to the DND and MUR terminals of the electronic doorplate.
2. Rename these relays to **DND** and **Clean** accordingly.
3. Set **Relay Type** to **DND Indicator** and **MUR Indicator**.
4. Set **Power off Memory** to **OFF**.
5. Set the trigger status **NONC** to **NO**.
6. Save the settings.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-fyx1fe9h.png)

#### 

**Doorbell Setting**

1. Enable the **Input** channel connected to the doorbell terminal of the electronic doorplate.
2. Rename the input as **Doorbell**,
3. Set **Input Type** to **Doorbell**.
4. Set the trigger status **NONC** to **NO**.
5. Save the settings.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-99of5t7a.png)

#### Configure Guest Room Lighting

1. **Enable** the relay connected to the light.
2. **Rename** the relay as Guest Room Light.
3. Set **Relay Type** to **Light**.
4. Set **Power off Memory** to **OFF**.
5. Set the trigger status **NONC** to **NO**.
6. Save the settings.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-blxyych2.png)

## **Function Settings**

### Scene Configuration

Scenes must be configured in the BelaHome app or the User Web Portal.

After configuration, scenes will automatically sync to the H5 interface.

For detailed instructions, see [Create automation scenes](https://knowledge.akuvox.com/docs/create-automation-scenes).

### HyPanel Display Configuration

#### Screen Saver

Log in the home center’s device web portal, click **Add Wallpaper** and upload the desired image.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-w1u02xhp.png)

#### Lock Screen Configuration

To prevent guests from accidentally modifying system functions on the HyPanel device, enable the following settings:

1. Go to **Settings > Display**, and enable **Lock Home Screen Layout**.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-4dv3fqnv.png)

1. Go to **Settings > System Lock**, enable **Setting Lock**, and set a digital password.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-tum1pshg.png)

## 

### Voice Assistance

Voice assistant configuration must be performed room by room.

If you wish to use a voice assistant, refer to the integration guides:

- Google Home: [https://knowledge.akuvox.com/docs/integrate-akubela-with-google-home](https://knowledge.akuvox.com/docs/integrate-akubela-with-google-home)
- Apple HomeKit: [https://knowledge.akuvox.com/docs/integrate-akubela-with-apple-homekit](https://knowledge.akuvox.com/docs/integrate-akubela-with-apple-homekit)
- Amazon Alexa: [https://knowledge.akuvox.com/docs/integrate-akubela-with-amazon-alexa](https://knowledge.akuvox.com/docs/integrate-akubela-with-amazon-alexa)

# 

## **Room Management**

> [!NOTE]
> NOTE:
> 
> A room cannot be checked in or out until all its devices are installed and connected to the cloud.

### **View Room and Device Data**

#### **View dashboard overview**

Go to **Overview**. The dashboard displays the following information.

|  | To Stay | Scheduled check-ins today |
| --- | --- | --- |
| Checked Out | Check-outs completed today |
| Please Clean | Rooms awaiting cleaning |
| Room status data | Today’s Vacant Rooms | Available rooms |
| Today’s Check-Ins | Number of completed check-ins today |
| Number of people staying | Current guest count |
| Today’s Occupancy Rate | Today’s room occupancy percentage |
| Device data | Total number of devices | Total installed devices |
| Online devices | Devices currently connected |
| Offline devices | Devices not connected |
| Low battery | Devices with low battery alerts |

![屏幕截图 2025-02-26 153020](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-x5ijgm11.png)

#### View room status

Go to **Room > Room Status**. The room card color indicates its current status:

- Green: Vacant&ready, available for booking
- Blue: Occupied
- Yellow: Reserved, not yet checked in

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-a9tmwu5f.png)

You can also check room status on the **Room > Room Calendar**.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-bu9r5wnp.png)

## 

### **Check-In and Check-Out**

You can check guests in and out from either the **Room Status** or the **Room Calendar** page.

#### Check-in

1. Hover over a green vacant room card and click **Check in**.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-fwd9cmpw.png)

1. Select check-in and check-out times, then fill in the guest’s details.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-pcuiie6d.png)

1. Click **Add Guest** to include any accompanying people.
2. To issue room access cards or grant access permissions, click **Issue Card**. You can add 2 RF cards and create 6-digit smart lock codes per room.

> [!NOTE]
> **NOTE:**
> 
> The access credentials become active at check-in and expire automatically at check-out. If the guest checks out early, all access credentials will be immediately disabled.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-zxxaducm.png)

#### Check-out

1. Hover over the room card and click **Check Out**. ![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-b7kekict.png)
2. Click **OK** to confirm. The room status will automatically change to “Vacant Dirty”.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-t8gj43gw.png)

> [!WARNING]
> **TIP:**
> 
> - From the Room Status page, you can also:
>   - Mark the room as dirty or clean manually
>   - Cancel bookings
>   - Add guests
>   - View room details
> - The Room Calendar page allows you to:
>   - Choose specific dates and rooms and make reservations
>   - Enter guest information
>   - Assign access permissions
> - For more instructions, see [GRMS user guide](https://knowledge.akuvox.com/docs/guest-room-management-system-grms-user-guide).

### **View Access Authorization Records**

Go to **Room > Authorization Records** to view all guest access permission records.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-qzhs440y.png)

### **Check Room Orders**

Go to the **Orders** page to search by guest’s name, booking number, or other details. Click **Detail** to see order information.

Order statuses include:

- Check In: Awaiting guest check-in
- Checked In: Guest has already checked in
- Checked Out: Checked out manually and automatically
- Overdue Checked Out: Automatically checked out after stay expired

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-m9qt76d1.png)

### **Manage Devices**

- To check smart home devices, devices connected to switch actuator, and wired devices in guest rooms, go to Device > Device List > Smart Home.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-oaao3nv1.png)

- T**o** check door phones and access control devices, go to **Device > Device List > Access Control.** ![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-843isa0o.png)
- To remotely control smart devices in rooms, go to **Device > Device Control**.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-f5p6tjjb.png)

Or click the specific room card and go to **Setup > Room List > Detail**.

![room_details](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-a22j3g2r.png)

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-by139ltq.png)

- To view device logs, go to **Device > Device Logs**. ![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-35euj4h4.png)
- To view room service request and device alarms, go to **Setup > Message**.

![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-wwve6cby.png)

# 

## Room Guests Usage

After check-in, an H5 QR code will be displayed on the HyPanel Pro. Guests can scan it to access the H5 interface and control in-room devices.

H5 QR code display screen:

![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-ryp3rfcm.png)

![IMG_256](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-fhwg9v9d.png)

H5 interface:

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-6ljtv0jz.png) ![descript](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/ed-hybrid-wired-wireless-grms-solution-configuration-image-574fs7sx.jpg)