Provisioning Principle
El aprovisionamiento automático es una función utilizada para configurar o actualizar dispositivos en lote a través de servidores de terceros. DHCP, PNP, TFTP, FTP y HTTPS son los protocolos utilizados por los dispositivos Akuvox para acceder a la URL de la dirección del servidor de terceros que almacena archivos de configuración y firmware, que luego se utilizarán para actualizar el firmware y los parámetros correspondientes en el dispositivo.
Por favor, consulte el diagrama de flujo a continuación:
.png)
Configuration Files for Auto-provisioning
Los archivos de configuración para el aprovisionamiento automático vienen en dos formatos: archivos de configuración generales y archivos de configuración basados en MAC.
Diferencias:
Provisión general de configuración:
Un archivo de configuración general se almacena en un servidor, permitiendo que todos los dispositivos relacionados descarguen el mismo archivo para actualizar los parámetros.
Provisión de configuración basada en MAC:
Los archivos de configuración basados en MAC son específicos de cada dispositivo, identificados por sus direcciones MAC únicas. Los archivos nombrados con la dirección MAC del dispositivo se emparejarán automáticamente antes de descargarlos para su provisionamiento.
Nota
Los archivos de configuración deben estar en formato CFG.
El nombre del archivo de configuración general para la provisión por lotes varía según el modelo.
El archivo de configuración basado en MAC recibe su nombre según su dirección MAC.
Los dispositivos accederán primero a los archivos de configuración generales antes que a los basados en MAC si ambos tipos están disponibles.
Puedes hacer clic aquí para ver el formato detallado y los pasos.
AutoP Schedule
Akuvox te ofrece diferentes métodos AutoP que permiten al dispositivo realizar la provisión por sí mismo según el calendario.
Set it up on the web System > Auto Provisioning > Automatic AutoP interface.

Mode:
Power On: Allow the device to perform Autop every time it boots up.
Repeatedly: Allow the device to perform Autop according to the schedule.
Power On + Repeatedly: Combine Power On and Repeatedly modes, allowing the device to perform Autop every time it boots up or according to the schedule.
Hourly Repeat: Allow the device to perform Autop every hour.
Schedule: When Power On + Repeatedly mode is selected, you can select the specific day and time for the Autop.
Clear MD5: Used to compare the existing autop file with the autop file in the server; if the files are the same, then the provisioning will be stopped, thus avoiding unnecessary auto-provisioning.
Static Provisioning
Puedes configurar manualmente una URL específica del servidor para descargar el firmware o el archivo de configuración. Si se configura un calendario de provisión automática, el dispositivo realizará la provisión automática en un momento específico según el calendario de provisión automática que hayas configurado. Además, TFTP, FTP, HTTP y HTTPS son los protocolos que pueden utilizarse para actualizar el firmware y la configuración del dispositivo.
Download the Autop template on the System > Auto Provisioning > Automatic AutoP interface.

Set the AutoP server on System > Auto Provisioning > Manual AutoP interface.

URL: The TFTP, HTTP, HTTPS, or FTP server address for provisioning.
Username: Set up a username if the server requires a username to access.
Password: Set up a password if the server requires a password to access.
Common AES Key: Set up an AES code for the intercom to decipher the general Auto Provisioning configuration file.
AES Key(MAC): Set up the AES code for the intercom to decipher the MAC-based auto-provisioning configuration file.
Note
AES, as one type of encryption, should be configured only when the config file is encrypted with AES.
Server Address Format:
TFTP: tftp://192.168.0.19/
FTP: ftp://192.168.0.19/(allows anonymous login)
ftp://username:password@192.168.0.19/(requires a user name and password)
HTTP: http://192.168.0.19/(use the default port 80)
http://192.168.0.19:8080/(use other ports, such as 8080)
HTTPS: https://192.168.0.19/(use the default port 443)
Tip
Akuvox does not provide a user-specified server. Please prepare the TFTP/FTP/HTTP/HTTPS server by yourself.
DHCP Provisioning
La URL de aprovisionamiento automático también puede obtenerse usando la opción DHCP, que permite al dispositivo enviar una solicitud a un servidor DHCP para un código de opción DHCP específico. Si quieres usar CustomOptionsegún lo definido por los usuarios con códigos de opción que van de 128 a 255), estás obligado a configurar DHCP Custom Option en la interfaz web.
.png)
Nota
El tipo de Opción Personalizada debe ser una cadena. El valor es la URL del servidor TFTP.
Set up DHCP Autop with Power On mode and export the AutoP Template to edit the configuration.
Download the Autop template on System > Auto Provisioning > Automatic AutoP interface.

Set it up on System > Auto Provisioning > DHCP Option interface.

Custom Option: Enter the DHCP code that matches the corresponding URL so that the device will find the configuration file server for the configuration or upgrading.
DHCP Option 66: If none of the above is set, the device will automatically use DHCP Option 66 to get the upgrade server URL. This is done within the software, and the user does not need to specify this. To make it work, you need to configure the DHCP server for option 66 with the updated server URL in it.
DHCP Option 43: If the device does not get a URL from DHCP Option 66, it will automatically use DHCP Option 43. This is done within the software, and the user does not need to specify this. To make it work, you need to configure the DHCP server for option 43 with the updated server URL in it.
PNP Configuration
Plug and Play (PNP) es una combinación de soporte hardware y software que permite a un sistema informático reconocer y adaptarse a cambios en la configuración de hardware con poca o ninguna intervención por parte del usuario.
Haz clic aquí para ver el vídeo de configuración.
Enable/disable it on the web System > Auto Provisioning > PNP Option interface.
