Debug

Prev Next
This content is currently unavailable in Spanish. You are viewing the default (English) version.

System Log for Debugging

Los registros del sistema pueden usarse para fines de depuración.

Set it up on the web System > Maintenance > System Log interface.

  • Log Level: Select log levels from 1 to 7 levels. You will be instructed by Akuvox technical staff about the specific log level to be entered for debugging purposes. The default log level is 3. The higher the level is, the more complete the log is.

  • Export Log: Click the Export tab to export a temporary debug log file to a local PC.

  • Enable Remote System Log: Set whether a remote server can receive the device log.

PCAP for Debugging

El PCAP se utiliza para capturar el paquete de datos que entra y sale de los dispositivos con fines de depuración y resolución de problemas.

Set it up on the System > Maintenance > PCAP interface.

  • PCAP Specific Port: Select the specific ports from 1-65535 so that only the data packets from the specific port can be captured. You can leave the field blank by default.

  • PCAP: Click the Start tab and Stop tab to capture a certain range of data packets before clicking the Export tab to export the data packets to your Local PC.

  • PCAP Auto Refresh: If it is enabled, then the PCAP will continue to capture data packets even after the data packets reach their 1M maximum in capacity. If it is disabled, the PCAP will stop data packet capturing when the data packet captured reaches the maximum capturing capacity of 1MB.  

Remote Debug Server

Cuando el dispositivo tiene un problema, puedes usar el servidor de depuración remoto para acceder al registro del dispositivo de forma remota con fines de depuración.

Set it up on the System > Maintenance > Remote Debug Server interface.

  • Remote Debug Server Connect Status: Display the connection status between the device and the server.

  • Server IP Address: Enter the IP address of the server.

  • Server Port: Enter the server port.

Web Call

The web call feature allows for making calls via the device’s web interface, commonly used for remote call testing purposes.

Make a web call on System > Maintenance > Web Call interface.

  • Web Call (Ready): Enter the target IP/SIP number to dial out.

Ping

El dispositivo te permite verificar la accesibilidad del servidor objetivo.

Set it up on the System > Maintenance > Ping interface. Click Start to start the detection, and the results will display on the web.

  • Cloud Server: The server to be verified.

  • Server Type: The service type includes TCP connection, FTP service, SIP service, etc.