Debug

System Log for Debugging

If you want to export the system log to a local PC or a remote server for debugging, you can set up the function on the web Upgrade > Advanced > System Log interface.

• Log Level: Log level ranges from 0 to 7 levels. You will be instructed by Akuvox technical staff about the specific log level to be entered for debugging purposes. The default log level is 3. The higher the level is, the more complete the log is.

• Export Log: Click the Export tab to export a temporary debug log file to a local PC.

• Remote System Server: Enter the remote server address to receive the system log and it will be provided by Akuvox technical support.

PCAP for Debugging

To set up PCAP, go to the web Upgrade > Advanced > PCAP interface.

• Specific Port: Select the specific port from 1-65535 so that only the data packet from the specific port can be captured. You can leave the field blank by default.

• PCAP: Click the Start tab and Stop tab to capture a certain range of data packets before clicking the Export tab to export the data packets to your Local PC.

• PCAP Auto Refresh: When enabled, the PCAP will continue to capture data packets even after the data packets reach 50M maximum in capacity. When disabled, the PCAP will stop data packet capturing when the data packets reach the maximum capturing capacity of 1MB.

User Agent

To set it up, go to the web Account > Advanced > User Agent interface.

Capture Log

You can set up a remote server to receive the device’s capture log on the Upgrade > Advanced > Capture Log interface.

Screenshots

To take screenshots, go to Upgrade > Advanced > Screenshots interface, then click Screenshots.