LED Setting on Card Reader Area
Vous pouvez activer ou désactiver l’éclairage LED sur la zone lecteur de carte. Vous pouvez aussi fixer une heure précise pour allumer la lumière.
To set it up, go to Device > Light interface.
Backlight Intensity: Adjust the backlight intensity; the bigger the value, the brighter the backlight.
Start Time - End Time (Hour): Select the time span for the LED lighting to be valid, e.g., if the time span is from 18-22, it means the LED light will stay on during the time span from 6:00 pm to 10:00 pm in one day (24 hours).
LED Always On When Relay Triggered: Disabled by default. If enabled, the LED stays on when the relay is kept activated. Its brightness follows the Backlight Intensity setting.
Keypad Light
When the keypad light is enabled, the keypad light flashes every time users press the keypad.
To set it up, go to Device > Light > Keypad Light interface.
Light Blink Control
You can disable all light blinking effects for a scheduled time, including network connection, door opening, and TOF trigger indications.
To set it up, go to Device > Light interface.
Disable Blinking: The feature is disabled by default.
Effective Schedule: Apply the schedule to the feature by moving it from the left to the right box.