G31 Gateway Firmware (Click to download)
Version: 31.1.38.20
Release Notes
Version: 31.1.38.20
Release Date: April 24, 2026
Supported akubela Cloud Version: V4.0.2
New Features:
- Added New Device Support
- Electric: EU standard neutral-required 1–4 gang switches, US standard touch switches, US/EU sockets, SM series switches, M1 series hybrid switches, X20U series hybrid switches, and client switches.
- Lighting: Zigbee AC Triac Dimmer, Zigbee LED Dimmer, CCT LED Controller, RGB LED Controller, RGBW LED Controller, RGB+CCT LED Controller, and Zigbee Constant Current LED Driver.
- Climate: Boiler switch
- Security: HAC
- Curtain Enhancements
- Added support for roller blinds setup and control.
- Added support for assigning roller blind type to unidentified devices.
- Added support for Zigbee Shade Motor travel control.
- Added support for upgrading locks and IR21 devices via the device web portal.
Optimizations:
- Device cards in the app now reflect offline status based on the actual status of IPCs and door phones.
- Increased the maximum number of family member accounts from 30 to 63.
Fixed Bugs:
- Fixed an issue where devices removed from a Device Group remained controllable via the group if their device type was modified while G31 was acting as the Home Center.
- Fixed an issue where a “curtain close” scene was not triggered by tapping the Close button, but only when adjusting the curtain position manually, when G31 was used as a sub-gateway.
- Fixed an issue where the curtain motor continued running after exiting the calibration process.
- Fixed an issue where, after adding a switch module and configuring it as a curtain via G31, tapping Pause when the curtain was fully open incorrectly sent a Close command, triggering unintended state-based scenes.
Version: 31.1.37.83
Release Date: February 10, 2026
Supported akubela Cloud Version: V4.0.0
New Features:
- Added support for water level sensors when G31 is used as a sub-gateway.
Version: 31.1.37.71
Release Date: December 29, 2025
Supported akubela Cloud Version: V3.4.3
New Features:
- Added support for 2-Gang Switch Modules when G31 serves as the home center; relay types can be switched between Switch, Light, and Shade.
NOTE:
Switch Modules added in previous versions must be re-added after upgrading to ensure correct device data.
- Added support for Multi-Association and Device Group features when G31 serves as the home center.
Version: 31.1.37.63
Release Date: December 10, 2025
Supported akubela Cloud Version: V3.4.3
Fixed Bugs:
- Resolved a scene control failure for IR devices.
Version: 31.1.37.60
Release Date: December 9, 2025
Supported akubela Cloud Version: V3.4.3
New Features:
- Added compatibility with 4-/6-/8-button Smart Key Switches (SM-4G, SM-4G2S, SM-4G4S).
NOTE: This feature applies only with G31 configured as a sub-gateway for an Android home center.
Version: 31.1.37.59
Release Date: December 3, 2025
Supported akubela Cloud Version: V3.4.3
New Features:
- Added compatibility with 4-/6-/8-button Smart Key Switches (SM-4G, SM-4G2S, SM-4G4S).
- Added compatibility with Zigbee Metal Key Switches (ZBM1-R4B4-EU, ZBM1-R2B6-EU, ZBM1-R4B8-EU).
- Added support for the Zigbee Group feature.
Version: 31.1.37.56
Release Date: November 14, 2025
Supported akubela Cloud Version: V4.0.0
New Features:
- Added support for using the device as a sub-gateway for HyPanel Elite 7.
Optimizations:
- Optimized multi-AP connections.
Fixed Bugs:
- Fixed issues with standalone temperature and humidity statistics.
- Fixed an issue where the device would reconnect using the previous home center IP address if multicast failed.
Version: 31.1.37.37
Release Date: September 10, 2025
Supported akubela Cloud Version: V3.4.0
New Features:
- Added support for garage door control when G31 is used as a sub-gateway.
- Added support for Merrytek human presence sensors when G31 is used as a sub-gateway.
Fixed Bugs:
Fixed an issue where IR21/IR22 infrared AC scene control status did not refresh properly.
Version: 31.1.37.19
Release Date: July 14, 2025
Supported akubela Cloud Version: V3.3.0.1
Optimizations:
- Optimized network pairing and mesh networking test process.
- Optimized indicator light blinking rules.
Fixed Bugs:
- Fixed an issue where connecting to a x.x.0.x wired network in network pairing mode prevented access to the home center configuration page.
Version: 31.1.37.6
Release Date: April 24, 2025
Supported akubela Cloud Version: V3.2.0.1
New Features:
- When used as a sub-gateway, G31 allows changing the relay type of 1/2-gang Zigbee switch modules to Heating.
- When connected via Wi-Fi, G31 supports switching Wi-Fi networks through the app.
Fixed Bugs:
- Fixed an issue where adding a sub-gateway via the app caused unexpected logout when HyPanel Pro was set as the Home Center with a family account..
- Fixed an issue where devices offline for over 3 minutes due to power loss incorrectly appeared online in the app when G31 was used as the home center device.
- Fixed the issue where HCHO values from the Air Quality Monitor did not display status indicators "Good," "Normal," and "Poor" when G31 was used as a sub-gateway.
Version: 31.1.31.27
Release Date: December 18, 2024
Supported akubela Cloud Version: V3.1.1
New Features:
- Compatible with ORVIBO Mix Switch.
- Support for transmitting information of connected devices to the cloud.