Get Started

Your HyPanel KeyPlus

Physical buttons

The six physical buttons on HyPanel KeyPlus ley you control connected devices or trigger scenes with manual conditions.

• To quickly configure the unconfigured buttons, simply press them to open the setup screen.

• To customize or change a button's function:

  1. Swipe down from the top edge of any screen.

  2. Tap > System Settings > Key Control.

  3. Select the desired button and assign it to the control object.

• To adjust indicator light settings:

  1. Go to > Display > Indicator Light.

  2. Toggle on or off the indicator light, adjust its brightness, or set a schedule.

Control center

To open the Control Center for quick setting, swipe down from the top edge of any screen.

Swipe down from the top edge on non-home screens to open the Control Center. More Function is replaced by Homepage; other buttons remain unchanged.

Notification center

To access the notification center, swipe down from the top edge of any screen and tap . All alerts, alarms, and system notifications appear here, including the false attempt and loitering alarms from SL50 and SL60 smart locks.

If your HyPanel is part of a community project, you can also receive notifications from the property managers, such as package deliveries, community voting, upcoming events, and more.

TIP :

To mute notification sounds and prevent pop-ups, simply tap > .

   

Home screen

Every time you wake up the HyPanel KeyPlus, the homepage appears, offering up to 30 customizable pages where you can add quick access cards for easier control of your smart home.

Add shortcut cards

You can add cards for devices, scenes, contacts, rooms, function tabs, third-party apps, and more.

1. On the homepage, press and hold a blank area, or press and hold any existing card and tap Homepage Edit.

2. Tap .

3. Choose a card type, then select the specific card you want to add.

Replace, delete, or rearrange cards

• Replace a card: Press and hold the card, then select Replace.

• Remove a card: Press and hold a blank area on the homepage, and tap . Or press and hold the card, then select Delete.

• Rearrange cards: Press and hold a blank area on the homepage, then press and hold the card you want to move, and drag it to a new position.

Lock Home screen

To prevent unauthorized or accidental changes to the Home screen, swipe down from the top edge of any screen, go to > Display, and enable Lock Home Screen Layout.

Once enabled, the following actions will be disabled:

• Adding, removing, replacing, or rearranging shortcut cards

• Changing display templates

• Modifying device settings

• Deleting devices

Guest room control QR code

NOTE:

This feature is only available on panels used in hotel guest rooms for GRMS projects.

For panels in GRMS setups, a QR code will appear on the Home screen. Hotel guests can scan the code to control their room devices via an H5 web interface without downloading any app.

The QR code is active only during the guest’s stay.

Once the guest checks out, the QR code becomes unavailable.

Gesture control

The F51-R2-EU version of HyPanel KeyPlus can connect with two relays, allowing you to use finger gestures for convenient control from any screen:

• To open/close relay 1, simply swipe down with 2 fingers.

• To open/close relay 2, swipe down with 3 fingers.

NOTE:

• This feature cannot work if the connected relays are shades.

• Gesture Control with Cooling/Heating Systems.

  • If Relay 1 is linked to a cooler or heater, use 2 fingers to swipe down for control.

  • When Relay 2 is connected to the cooler or heater, employ 3 fingers to swipe down for control.

  • If both Relay 1 and Relay 2 are connected to coolers and heaters, they combine into one thermostat. Swipe down with 2 fingers to open/close the thermostat; the 3-finger gesture is not available in this case.

To disable gesture control, go to > System Settings > Gesture.

Display orientation

You can set the screen to vertical or horizontal based on how the device is installed.

To change the direction:

Swipe down from the top edge of any screen, and go to > Installer Settings > Installation Direction.

Learn the server status

If you notice that some features aren’t working, first check whether your device is properly connected to the server.

1. Swipe down from the top edge of any screen, and tap  > System Settings > Connect Status.

2. The connection status will display in the center of the screen.

• The green icon indicates that your device is successfully connected to the cloud server and communication is normal.

• The yellow icon indicates that your device is being used locally without the cloud connection.

• The red icon indicates an issue such as cloud connection failure, SIP registration error, or other system abnormalities.
  Please contact your service provider or the akubela technical team for assistance.