- 28 Oct 2021
- Print
- DarkLight
- PDF
How to configure screen lock in indoor monitor
- Updated on 28 Oct 2021
- Print
- DarkLight
- PDF
Scenario
Akuvox indoor monitors support screen lock function which will help you to prevent mis-operation and save power without shutting down the whole system.
Operation Instruction
- Applicable devices: All indoor monitors.
- Models that support Pin code unlock: All indoor monitors.
- Models that support Face ID unlock: IT83A/C, IT82A/C, C317A/C, C319A/C.
Operation Procedure
Screen lock
More>Settings>Display>Screen Lock, enable the function, then choose Screen Saver Lock Time among 30 minutes, 1 hour, 2 hours and Never. If you choose the time as 30 minutes, the device enters the screen lock mode if no operation is performed within 30 minutes. If you choose the time as never, the device will never enter the screen lock mode.
Unlock Options
Password
More>Settings>System Code, input the default system code ”123456”, create a new password.
After the configuration, the screen lock will show as following picture, you will need to input the code you set to enter the device.
Face ID
More>Settings>More, input the system code, Face ID, click add to add face ID.
After the configuration, the screen lock will show as following picture, you will need to unlock the device by the Face ID you set.