HyPanel Ultra Firmware

HyPanel Ultra Firmware (Click to download)
Version: 281.1.40.112

Release Notes

Version: 281.1.40.112

Release Date: March 10, 2026
Supported akubela Cloud Version: v4.0.1

New Features:

1. Robot Send

   • After binding a robot station in the cloud, a 1×1 Robot function card appears on the homepage. The card supports sorting but cannot be removed.
   • Tapping the card opens the robot service page with the following options:
     • Summon: Taps this option to start a task.
     • Robot is On the Way: The robot receives the command and moves to the user’s location.
     • Robot Arrived: When the robot arrives at the door, the device notifies the user via a simulated incoming call.
     • Picked Up: The user places the item in the robot compartment within 5 minutes and confirms the action.
     • Delivery Arrived: The robot delivers the item to the destination and the device sends a completion notification.

2. Liquid Level Sensor

   • Added Liquid Level Sensor under Others on device addition screen.
   • Supports status alerts, displaying three levels: Normal (White), Low-Level Alarm (Light Green), and High-Level Alarm (Red).
   • Supports configuration of upper limit, lower limit, installation height, and maximum liquid depth.

3. Face Recognition

   • Added General Face Data feature. Tap Edit icon to configure Show Personalized Home Themes by Facial Permissions, Personalized Home Themes, and Allow Access to Other Pages.
   • When enabled, a Guest Entry button appears on the homepage lock screen. Users entering through this option can only access pages defined by the general face template. When disabled, the Guest Entry button is hidden.

4. Installer Settings

   • Accessing Installer Settings requires a password (default: 000000).
   • If the password is forgotten, it can be reset via Autop authentication.

5. Batch Construction

   • For controllable devices (switches, lights, sockets, thermostats, valves, curtains), On/Off test buttons are added to identify devices. By tapping curtain devices’ Open and Close buttons, they operate for 5 seconds before stopping.
   • When uploading a template: the room structure follows the template configuration; rooms not included in the template are automatically removed, and their devices are moved to the Others space.
   • Scenes not included in the template are automatically removed after applying the template.
   • Devices are automatically matched during template application. Matched devices show Correct status with a Clear option to remove the automatic match if manual reassociation is required.

6. Device Support

   • Added support for Philips Hue Bridge Pro integration.

7. Scenes

   • Added support for multi-state scene types.
   • Added scene variable configuration and management.
   • Added support for copying scenes.
   • Added Smart Snapshot option for tasks.
   • Added support for using door phone incoming calls as scene trigger conditions.
   • Improved scene configuration interaction and usability.

8. Permission Management

   • Added support for batch configuration of device permissions.
   • Added support for batch configuration of BelaHome account permissions.

9. Basic Settings

   • Adjusted adjustable temperature range logic.
   • Added support for configuring global curtain direction indication.

10. Curtain Devices

    • Added support for curtain direction indication configuration.
    • Updated curtain card percentage display to represent closing percentage instead of opening percentage.

11. Others

    • Added support for changing device icons in the app for light, air condition, and scene devices (requires the new UI version of the app).
    • Enforced uppercase default password for HTTP access.
    • Added support for uploading gateway and home center logs via the app.
    • Added support for the following Shelly devices:
      • Shelly 1 Mini Gen4
      • Shelly 2PM Gen4
      • Shelly 1 Gen3
      • Shelly 1PM Gen3
      • Shelly 1PM Mini Gen3
      • Shelly 2PM Gen3
      • Shelly DALI Dimmer Gen3
      • Shelly Dimmer Gen3
      • Shelly Dimmer 0/1-10V PM Gen3
      • Shelly 2L Gen3
      • Shelly 4PM Smart Switch

Fixed Bugs:

1. 1.Fixed an issue where Energy Metering Display and Air Quality Display item titles sent via ETS on devices connected to F51-KNX base were not optimized or properly localized.
2. Fixed an issue where Hungarian language support was missing on the device.
3. Fixed an issue where the Polish Genway default app could not maintain login sessions.
4. Fixed an issue where RTSP streams could not be viewed on the device when the RTSP password contained “#” or “/” characters.

Version: 281.1.40.33

Release Date: February 3, 2026
Supported akubela Cloud Version: v4.0.0

Fixed Bugs:

1. Fixed the issue where access control devices could not be unlocked via akubela panels after being connected to the cloud.

Version: 281.1.40.31

Release Date: January 29, 2026
Supported akubela Cloud Version: v4.0.0

Fixed Bugs:

1. Fixed an issue where KNX Homepage cards sent from ETS were re-added to the end of the homepage when the sub-gateway went online or offline after the user rearranged the cards.

Version: 281.1.40.29

Release Date: January 23, 2026
Supported akubela Cloud Version: v4.0.0

New Features:

1. Home Screen
   (1) Component Editing: Added multi-size Contact components, supporting both single and multiple selection.
   (2) Contact Interface Redesign

   • Contacts are now organized into Room, Public Area, and User categories.
   • Supports initiating calls and voice messages to the entire home, a specific room, or selected users.
   • Added a New Message entry to centrally view and manage unread messages, voice messages, and missed calls.

2. Connection Status
   (1) Optimized device connection status indicators:

   • When akubela Cloud or Akuvox SmartPlus Cloud connection fails, an exclamation icon is displayed; tapping it shows the failure reason.
   • Display the SIP number after successful SIP registration.

3. Control4 Integration
   (1) Added Control4 integration under Settings > Integration.

4. Installer Settings
   (1) Renamed Advanced Settings to Installer Settings.
   (2) Clearly distinguished Reset and Restore functions:

   • Reset: Clears call logs, photos, energy data, notifications, and restores display, sound, and DND settings to default, while retaining home layout, devices, scenes, and account bindings. The device remains online and usable.
   • Restore: Returns the device to the initial setup state. If previously connected to the cloud, the device must be removed from the app or web portal before reuse. Intended for device transfer, full reinstallation, or unrecoverable issues.

   (3) Added Template Batch Import/Export function under Installer Settings.

   • Template Import (up to 100 templates): Save the full configuration of a completed home as a reusable installation template.
   • Template Export: Apply a template to a new home; the system guides device matching and automatically syncs device names, rooms, homepage layout, scenes, and related settings.

5. Do Not Disturb (DND)
   (1) Added quick DND options via Control Center: 30 min, 1 h, 2 h, 8 h, 24 h, Always (default).
   (2) When a timed DND overlaps with a scheduled DND period, the latest DND end time takes precedence.

6. Cloud Music Assistant – Third-Party Audio Source Integration(Amplifier)
   (1) Added Music Library for binding and switching music services (currently supports QQ Music, with authorization via WeChat QR code).
   (2) After authorization, users can browse artists, search music, play songs directly, and add tracks or playlists to favorites or custom playlists.
   (3) Supports fuzzy and precise search by song, playlist, artist, or album.

7. Smart Lock Integration
   (1) Added support for iTec, TTLock, and Lockly smart locks.

8. Apple HomeKit (Beta)
   (1) Supports selective synchronization of devices and scenes with HomeKit, enabling voice control of scenes.
   (2) After adding a door phone to HomeKit, users can monitor video and unlock doors.

9. RS485 Enhancements
   (1) RS485 flush mounted modules now support RTU and Specific device types.
   (2) Added support for the B19 Central AC Outdoor Controller and its sub-devices.

10. Cloud Backup
    (1) Expanded backup and restore content.
    (2) When a cloud backup is delivered to the device, a Restore Backup Data option is displayed for one-tap recovery.

11. SDMC + Local-to-Cloud Transfer + Card Issuance
    (1) SDMC now supports project export, including building, home, indoor unit MAC, door phone MAC, and network availability status. Uploaded projects are automatically converted into community projects and home and device configurations in the cloud, with local-to-cloud transfer function enabled.
    (2) After project and home configuration, once devices are connected to the cloud and a family administrator account is added, temporary passwords and QR codes can be issued for visitors. Authorized floor access can be selected and will be synchronized to door phones and elevator control systems.
    (3)Supports SDMC-initiated forced notifications to devices.

12. Web Portal
    (1) After binding a family administrator account, the local device web account is disabled by default.
    (2) Default local administrator account (Admin888) now prompts for password change on first login.
    (3) Scene page now supports filtering by device and scene.
    (4) Updated User Agreement and Privacy Policy.
    (5) Installer reset rules unified to reset user data.

Optimizations:

1. Thermostat ventilation slider color updated to green.
2. SL50 / SL60 Locks
   • Video does not auto-play on entry; playback starts on button tap.
   • Previous frame is retained when re-entering the detail page.
   • Added button to switch video display size.
3. Display screen saver default set to Everyday.
4. Added loading animations for video pages (e.g., door phone and lock monitoring).
5. On the home screen category view, Gateway is merged into More.
6. All advanced devices on the F52-KNX flush mounted module now support error codes display.
7. akubela panels support multi-control for curtain switches.
8. Optimized door unlocking logic.

Fixed Bugs:

1. Fixed Google Play activation failure.
2. Fixed card missing issue.

Version: 281.1.39.610

Release Date: December 19, 2025
Supported akubela Cloud Version: v3.4.3

Fixed Bugs:

1. Fixed an issue where curtain switches or curtain control panels failed to calibrate.
2. Fixed an issue where fan speed could not switch directly to Low after downloading the HVAC type to the F51-KNX flush mounted module.
3. Fixed a startup failure that occurred when devices with Google Play installed were upgraded from versions earlier than V3.4.1 to V3.4.1 or V3.4.3.
4. Fixed an issue where locally added IPC devices appeared as multiple cards on the panel after connecting to the cloud.
5. Fixed an issue where one IR21 device failed to respond when a scene controlled two IR21 devices.
6. Fixed an issue where temperature and humidity offset settings configured in the device web portal were not applied after the device connected to the cloud.

Version: 281.1.39.604

Release Date: December 3, 2025
Supported akubela Cloud Version: v3.4.3

New Features:

1. Added compatibility with Australian 1-/2-Gang Smart Zigbee Wall Socket

   • Support customizing the socket’s indicator light settings: Always Off, Always On, Follow Switch, On When Switch Is Off.

2. Added compatibility with Australian Zigbee Curtain Motor

   • Support open/close and angle adjustment.
   • Support for setting up upper/lower limit via the app.
   • Support curtain direction reversal, micro-adjustment, and device type switching.

3. Added compatibility with 2-/4-Gang Dry Contact Module

4. Added compatibility with SL21 Smart Lock

   • Support door unlock events and notifications, including one-time password unlocks, locked state notifications, failed attempt alerts, and tamper alarms.

5. Added support for five-constant HVAC systems.

6. Wireless Amplifier Auto-Reboot Feature

   • If the amplifier is idle between 2:00-4:00, it will automatically reboot at 2:00 and 3:00.
   • No reboot occurs if the device is playing during 2:00-4:00.

7. GRMS Screensaver Delivery Feature

   • Support up to 9 screensaver wallpapers sent from GRMS, overriding the default wallpapers.

8. Scene-Related Features

   • Improved scene-linking behavior on button panels: In the user web portal’s device list, scene buttons can now be directly linked to manual scenes.
   • Added Stop as a condition option for Shade scenes.

Version: 281.1.39.441

Release Date: November 12, 2025
Supported akubela Cloud Version: v3.4.2

Fixed Bugs:

1. Fixed an issue where MAC verification failed after a 4-hour burn-in test.

Version: 281.1.39.435

Release Date: November 6, 2025
Supported akubela Cloud Version: v3.4.1

Fixed Bugs:

1. Fixed an issue where adjusting the color temperature of a Zigbee group caused lights outside the group to turn on.
2. Fixed an issue where Zigbee groups disappeared from the “Add Card” screen after scene permissions were disabled in the user web portal.
3. Fixed an issue where waking the voice assistant prevented the screen or screensaver from functioning properly.

Version: 281.1.39.415

Release Date: October 10, 2025
Supported akubela Cloud Version: v3.4.1

New Features:

1. S563 Installer Kit support for akubela device scanning
   (1) After scanning, HyPanel reports the following device information to S563: device name, device MAC address, full IP details (including DNS, subnet mask, etc.), and room number.
   (2) For local installation, an APIPA IP is automatically generated after setting the room number, with a default subnet mask of 255.255.0.0.
   (3) Added a Building Number configuration (range: 1–9) in the room number setting screen for local installation.

2. Property Management Platform
   (1) The booking feature now shows the current number of reservations out of the total available slots.
   (2) When property management features are configured, panels’ homepages display a 1×1 Property Management card, including Meter Reading, Repair Requests, and More. Tapping an entry navigates to the corresponding function page.
   (3) Property management cards can only be enabled or disabled via the Property Management Platform, and cannot be removed or replaced on the panel.

3. Added support for IP-485 multifunctional gateway(R10):
   (1) Added scanning and adding of R10 gateways; device names include the last six digits of the MAC address.
   (2) Device IP address is now displayed in the R10 configuration interface.
   (3) Added support for motion sensor and CO sensor input types.

4. Voice Assistant (Beta)
   (1) Added access to offline voice assistant (Beta) when the system language is set to Chinese.

5. Notification
   (1) Added support for notifications from SL50/SL60 smart locks, including anti-tamper alarms and loitering alarms.
   (2) Added support for Property Management Platform notifications, , including announcements, votes, and event information.

6. User Web Portal
   (1) Support for adjusting system temperature limits between 5-70 °C.
   (2) Scene tasks can now send high-temperature alerts to user emails.
   (3) Multi-control associations are limited to a maximum of 8 devices.

7. Synchronized UI changes for linked sub-devices during group control.

8. Added RTP obfuscation support for local-to-cloud monitoring data transfer.

9. Added support for saving multiple page templates in homepage editing.

10. Autop can configure device Wi-Fi settings, including SSID and password changes.

11. Languages
    (1) Added Hungarian language support on panels.
    (2) Updated Russian and Japanese language entries on panels.
    (3) Updated Russian language entries on the user web portal.

Version: 281.1.39.304

Release Date: September 3, 2025
Supported akubela Cloud Version: v3.4.0

New Features:

1. Added Turn Back App After Calling feature in the device web portal:

   • When enabled, device automatically returns to the previously active third-party app after interruptions by calls.
   • This setting is temporarily ignored during calls, upgrades, monitoring, backup & restores, or ETS downloads. Once these operations are completed, the timing resumes and the device returns to the app screen.

2. Added access to the new akubela-developed voice assistant (Beta) when the system language is set to Chinese.

3. Added support for S560 indoor monitor:

   • Supported S560 as a cloud-based contact via Akuvox SmartPlus Platform.
   • Supported making SIP and IP call with S560

4. Added support for smart locks for SL50 & SL60 in local mode.

   • SL50/SL60 locks can now appear as contacts. Users can view their live monitoring feeds on panels and tap the Talk button to on the monitoring screen to initiate intercom calls.
   • SL50/SL60 can communicate with HyPanel over the LAN for doorbell intercom and door unlocking, and can also forward calls to the Internet-connected app for functions like unlocking.

5. In the user web portal, rooms on the same or different floors can share the same name. Configuring a duplicate name on the same floor will trigger a popup reminder.

6. Maintained support for IP-based doorbell calling, monitoring, and lock control as implemented in previous firmware versions of akubela-developed locks.

Optimizations:

1. Device settings menu adjustments:
   KNX Setting and Discovery Settings moved under Advanced Settings.

2. Optimized IP-based status sync and lock/unlock control for SL50/SL60.

3. Extended offline detection for high-voltage Zigbee devices from 3 minutes to 10 minutes.

Fixed Bugs:

1. Fixed an issue where the stepless and relative color temperature controls of RGBCW did not match their corresponding entries in KNX panels.

2. Fixed an issue where the advanced switch on KNX panels was misaligned in portrait orientation.

Version: 281.1.39.208

Release Date: August 15, 2025
Supported akubela Cloud Version: v3.3.2.1

New Features:

1. User web portal:
   (1)Added support for modifying color temperature unit (K/M) under Setting > Basic Setting.
   (2)Added support for akubela-developed KNX database.

   • Adapted electric devices to support Advanced Switch type.
   • Added step control UI for lighting devices.
   • Added step control and angle open/close/pause UI for shades
   • Updated climate device settings with the gain network command and reset functions.
   • Audio Control now includes a power button and playback source switching.
   • Adaptation for other akubela-developed KNX devices and bug fixes for related devices.
   • F52-KNX devices now support web-based upgrade.

   (3) Device:

   • Electric: Clicking on the advanced settings of a Shelly device now opens the Shelly Web portal directly.
   • Light:
     A. Removed step dimming or stepless dimming options.
     B. When a light supports both step and continuous adjustment, the interface now displays both options.
   • Shade:
     A. Added step control and angle open/close/pause UI.
     B. When curtains support both step and stepless control, both options are displayed.
   • Security: Added support for smart locks SL20/30.
   • Climate: Optimized Ecobee binding process.
   • Switch actuator:
     A. R8 inputs now support Motion Sensor and CO Sensor types.
     B. R8 relays set for Heating/Cooling can now function as both triggers and conditions in scenes.

   (4)Security: Security mode tasks Turn On/Turn Off can now include any devices that support on/off control.

2. Settings:
   Added the option to change the color temperature unit (K/M) under Settings > System Settings > Unit Setting.

3. Contacts:
   When SL50 and SL60 locks are listed as contacts, their chat history shows SIP call and conversation records, and the chat page features a Monitor button.

4. Security-type devices:
   (1) Added support for smart locks SL20/30
   A. Non-always-alive locks no longer support active remote unlocking; the unlock option is hidden.
   B. During doorbell ringing, users can tap Unlock on the pop-up to unlock.

5. Lighting devices:
   (1)Adapted to the ETS database; removed step/stepless dimming settings.
   (2)For lights supporting both step and stepless dimming, their details page now provides access to both control modes.

6. Added SDMC platform support:
   (1)Support sending Notifications from the SDMC to devices.
   (2)Support displaying Alert alarms on the SDMC.
   (3)Supports sending door phone information from SDMC to devices.
   (4)Support viewing device call records via SDMC.

Optimizations:

1. Smart lock SL50/SL60 optimizations:
   (1)The call button on the monitoring page is hidden when the lock is configured as IP calls on the cloud, and shown when configured for SIP calls.
   (2)When configured for IP calls on the cloud, SL50/SL60 locks can communicate with HyPanel over the local network, supporting doorbell intercom and unlocking.
   (3)When configured for IP calls, calls can also be forwarded to the Internet-connected app , enabling remote unlocking and related functions.

2. Optimized space management page.

3. Removed DeviceViewModel and optimized LiveData.

4. Switch actuator optimizations:
   (1)Any input type can be set as NO or NC.
   (2)Relay and Output configured as Curtain or HVAC type will hide the power memory setting.

Fixed Bugs:

1. Fixed an issue where cloud-pushed upgrade packages could not be installed when tapping the Install button on the SL60.

Version: 281.1.39.128

Release Date: July 23, 2025
Supported akubela Cloud Version: v3.3.0.1

Fixed Bugs

1. Fixed an issue where devices occasionally failed to auto-answer doorbell group calls even when auto-answer was enabled.
2. Fixed an issue where Shelly devices could not be added.
3. Fixed an issue where KNX RGBW device cards could not be dragged on the homepage.

Version: 281.1.39.121

Release Date: July 11, 2025
Supported akubela Cloud Version: v3.3.0.1

New Features

Devices

1.Homepage
(1) Moved the account registration card to the top of the screen, left of the Notifications icon.
(2) Added support for hotel H5 QR codes.
(3) Third-party apps now automatically appear on the homepage after installation.
(4) Space cards now display temperature, humidity, and AQI data.
(5) Added a dedicated air quality card.
(6) Device names are no longer shown on 1x1 temperature/humidity cards.
(7) Added a temperature/humidity capability card with selectable data sources.
(8) Homepage editing enhancements:
 a. Updated the default templates 1 and 2.
 b. Added two recommended templates for different usage scenarios.
 c. Users can save and rename custom templates (layout editing is not supported).
 d. When selecting multiple scene or space cards, the interface now remains on the current style page.

2.Room Selection
(1) Top-level spaces without sub-spaces are now hidden in the navigation bar.
(2) Clicking the last room card on the right centers it on screen.
(3) Up to six space cards are displayed per page.

3.Space Editing
(1) Space cards now support using images uploaded from the app.
(2) Duplicate space names are allowed.

4.Photo Wall
(1) Supports vertical screen saver uploads via both the app and user web portal.
(2) Wallpaper clarity settings are now adjustable.
(3) Increased the number of default images to 20.
(4) Initially assigned room backgrounds now use unique default images; the default room uses a specific preset.

5.Call
Toggling between "End All Calls" and "End This Call Only" immediately ends the selected call.

6.Security
The SOS call configuration page now displays all available call recipients, including app user contacts, panel contacts, and door phone/access control devices.

7.Display
Added a Homepage Layout Lock. When enabled, users cannot rearrange, replace, or delete cards. All configuration options in the device settings screen are also disabled (grayed out).

8.Device Page
Filter buttons now include descriptive labels such as “Turn on lights,” and display a toast message when clicked.

9.Lights
Device cards now support color temperature and color gamut adjustments.

10.Shades
(1) Integrated Somfy Inteo Station V2 gateway.
(2) Curtains now support status display on device cards.

11.Security
Added support for garage door integration.

12.Electric
(1) Added support for hybrid panels with multi-channel switches and scene buttons.
(2) Integrated support for Shelly3 and Shelly4 devices.

13.Gateway
(1) Added support for the KS41-R4-EU model (HyPanel Lite).
(2) Added support for the HyPanel Elite 7.

14.Media
(1) Arylic integration optimizations:
 a. Device category renamed to "Amplifier" on the Add Device screen; default name is now "Speaker."
 b. Device names detected by Spotify now match those shown in the gateway.

15.Ecosystem Devices
Auto-detected ecosystem devices now support batch addition.

16.KNX Integration
(1) Compatible with the akubela-delevoped KNX database.
(2) Supports KNX zone integration.
(3) Extended support for additional KNX devices:
 a. When panels configured via the akubela KNX database use external devices as the source for temperature and humidity, corresponding cards will show external readings.
 b. Added KNX device card types:
  - 1x1 Energy consumption
  - 1x2 Step dimming
  - 1x1 Air quality
  - Custom card types
 c. Device type enhancements:
  · Electric: Added Advanced Switch (K32), energy metering devices
  · Light: Step dimming cards and support for RGB, stepless dimming
  · Shade: Step button support
  · Climate: Air quality monitoring, filter maintenance reminders
  · Security: Custom sensor types
  · Music: Loop playback and error code display
  · Other: Custom button devices and ETS-defined text devices

17. General Optimizations
    (1) All screen titles now support tap-to-return navigation.
    (2) Improved responsiveness of the keyboard popup for input.

User Web Portal

1.Scenes
(1) Scenes can now play specified audio files.
(2) The “Call Someone” task supports custom call accounts and can call any device or contact within the home.
(3) SOS tasks in security scenes can be configured with cloud-provided service numbers, custom SOS contacts, or any household device/contact.
(4) Scene names can now be duplicated.
(5) Curtain scene tasks now support: Open, Close, Open/Close, Stop, Open/Stop, and Close/Stop actions.

2.Devices
(1) Integrated with akubela-developed KNX database.
(2) Devices can now be hidden by category via app/web permissions.
(3) Integrated support for iEast and Arylic audio systems.
(4) Add-on support for multi-channel switch and scene button hybrid panels. RS485 switches are configurable via the web.
(5)For add-on switches, when changed to Scene Switch type, device cards and detail pages will show scene switch effect.
(6) Added support for garage roller doors.
(7) Integrated with Somfy Inte0 Station Y2 gateway.
(8) Added configuration support for 4 relays on the HyPanel Lite.
(9) Added support for HyPanel Elite 7.

3.Photo Wall
App/Web screensaver uploads now support vertical orientation, adapted for HyPanel Pro displays.

4. Settings
   Added API feature.

Device Web Portal
(1) Added support for configuring Auto Answer.
(2) Terminology translation now supports Excel format for import/export and allows direct use of translation libraries.

Optimizations:

1. Optimized the Air Quality Display on F52-KNX version of devices when sensor names or values were too long.
2. Optimized outer ring brightness adjustment in F52-KNX version of devices to support tapping anywhere on the ring, not just the white dot.
3. Optimized RGBW color palette brightness adjustment button for F52-KNX version of devices.
4. Optimized layout for dedicated section displays in F52-KNX version of devices.

Fixed Bugs:

1. Fixed an issue where all temperature and humidity cards display the panel’s own sensors after reboot.
2. Fixed device appearing in “Other” room when configured to Room 1 via ETS for F52-KNX version of devices.
3. Fixed duplicate room display when ETS sent a device to Floor 1 - Room 1 for F52-KNX version of devices.
4. Fixed an issue where floor and room merged in ETS still created a new floor/room instead of merging in F52-KNX version of devices.
5. Fixed humidity value displaying in F52-KNX version of devices as exactly 90% when it should show >90% for external sensors set via ETS.

Version: 281.1.39.29

Release Date: May 15, 2025
Supported akubela Cloud Version: v3.2.0.3

Fixed Bugs:

1. Fixed an issue where enabling door phone auto-discovery failed to detect door phones on the local network.
2. Fixed the issue where, under the APIPA conditions, HyPanel Supreme and Ultra as sub-gateways would auto-answer door phone calls but only display the door phone’s main camera, failing to show the sub-camera feed. HyPanel Pro was not affected.
3. Fixed the issue where disabling the cloud door phone permissions via the user web portal was not saved.

Version: 281.1.39.22

Release Date: April 23, 2025
Supported akubela Cloud Version: v3.2.0.1

New Features:

1. User Web Portal:
   (1) Door Phones:
   a. Support for linking door phones with cameras.
   b. Hide both the live view and detail page when the Related Door option is hidden.
   (2) Scenes:
   a. Allow for enabling human presence and motion sensors on scene and device detail pages.
   b. Removed sunrise/sunset as available scene conditions.
   c. Improved the selection process for scene conditions/tasks with fuzzy name search and filtering by space or category.
   (3) Security:
   a. Unified the display of arming and alarm pop-ups across web and other platforms.
   b. Added more configuration options for security zones.
   c. In Tasks, remove trigger relay, and added Turn on/off Device option, supporting device types including Light, Electric, Climate, and Siren.
   (4) Add-on&KNX Devices:
   a. Added support for 2 gang + 2 curtain modules, 6 gang switch modules, ZigBee smart radiator thermostats, and Danfoss thermostats.
   b. Added support for akubela HA controller(ZBMD-HAC).
   c. Support for the new HyPanel Lux model (CT61-Desktop-C1).
   d. Added option to enable/disable switches and all KNX devices in the device management interface.
   e. Support for changing the ETS-distributed KNX switch type to Light.
   (5) Added remote maintenance account management function for administrator account.
   (6) Added API control and whitelist.
   (7) Support logging in web portal via mobile number and password.
2. Removed devices’ online/offline records.
3. Support for staying on the room page after screen-off wakeup.
4. Added support for Polish.
5. Added support for unlocking door phone relays via Alexa voice commands.
6. Support setting static IP for Wi-Fi connections.
7. Lighting:
   (1) Support controlling built-in light on the CT61 desktop base.
   (2) Support for changing the ETS-distributed KNX switch type to Light.
8. Electric:
   (1) Added support for third-party 2 gang + 2 curtain modules and 6 gang switch modules.
   (2) Support for akubela HA controller (ZBMD-HAC).
   (3) Able to integrate with BTICINO switch.
9. Added support for RCU, ZigBee smart radiator thermostats, and Danfoss thermostats.
10. Shades:
    (1) Curtain UI angle can now be adjusted up to 180°.
    (2) Support for selecting different curtain/blind types with different UI and interactions.
    (3) Integration with AutoMate curtain motors.
11. Security:
    (1) Integration with Salto smart lock.
    (2) Support for adding third-party IPCs from different LANs to public areas in akubela Cloud community projects and viewing them in the BelaHome app (non-LAN mode).
    (3) Door phone previews can now be accessed in security mode.
    (4) Unified door list across preview, call, device card, detail, and live view screens.
    (5) Hiding unlock icons on monitoring, call, device card, and detail interfaces when HTTP is not configured; Hiding unlock icon on the calling interface when DTMF is not configured.
    (6) In security tasks, removed trigger relay, and added Turn on/off Device option, supporting Light, Electric, Climate, and Siren devices .
12. Integration with MIYUE M100B media devices.
13. Device Replacement:
    (1) Support for replacing faulty ZigBee devices.
    (2) Support KNX panel replacement after cloud backup.
14. Gateway:
    (1) Added support for the CT61-Desktop-C1 model.
    (2) Integration with gateways including Lutron 7, PS51-10VFANCOIL-EU, PS51-24VFANCOIL-EU, and PS51-R4-EU.
15. Door phones can now link with sub-cameras. Two video streams can be displayed at the same time and can be switched between primary and secondary cameras with a tap.

Fixed Bug:

• Fixed the issue where the device failed to integrate with Amazon Alexa and showed an authorization failure after login

Version: 281.1.38.436

Release Date: March 27, 2025
Supported akubela Cloud Version: v3.1.1.6

Fixed Bugs:

1. Fixed an issue where group control of RGB lights failed to adjust color and color temperature.
2. Fixed an issue where scenes downloaded from ETS, initially categorized by rooms, would reset to Whole House after a reboot.
3. Fixed local-to-cloud data transfer failures after multiple operations and added NACK support.
4. Fixed an issue where imported translation files could not be used.

Version: 281.1.38.421

Release Date: February 14, 2025
Supported akubela Cloud Version: v3.1.1.6

Fixed Bugs:

1. Fixed an issue where original multi-control associations remained effective after switching the relay type.
2. Fixed an issue where, in the Climate category, filtering devices by "Show Device On" and then clicking "All Off" to cancel the filter but failed to display 2-gang curtains.
3. Fixed an issue where Hue devices failed to add.