---
title: "Indicator Light Status"
slug: "indicator-light-status-1-1"
status: "new"
updated: 2026-09-24T01:51:54Z
published: 2026-10-08T03:18:55Z
canonical: "knowledge.akuvox.com/indicator-light-status-1-1"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Indicator Light Status

The LED indicator shows the device status as described in the table below:

| Status | LED Behavior |
| --- | --- |
| Normal operation (Ethernet connected, Wi-Fi connected, or hotspot enabled) | Green solid |
| On a call | Green slow flashing |
| Device resetting | Red flashing for 3 seconds, then the device reboots |
| Device starting up | Red solid (status updates after startup) |
| Device upgrading | Red solid (status updates after upgrade completes) |
| Network error | Green fast flashing |
| Fall detection verification | Red slow flashing |
| Alarm triggered | Red fast flashing |
| Installation tilt warning (horizontal deviation greater than 15°) | Red fast flashing |

> [!NOTE]
> Note
> 
> MR03 will only play the alarm sound and does not control the LED light when an emergency call alarm is triggered by EP10.

## Turn on/off the LED

You can turn on/off the LED on the **Fall Settings > General Settings > Other Settings** interface.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-BV3RIDHJ.png)