--- title: "Integration with Third-party Devices" slug: "integration-with-third-party-devices-3" updated: 2026-08-26T07:47:47Z published: 2026-08-26T07:47:47Z canonical: "knowledge.akuvox.com/integration-with-third-party-devices-3" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Integration with Third-party Devices ## Integration via HTTP API HTTP API is designed to achieve a network-based integration between the third-party device and the Akuvox device. Set it up on the web **Setting > HTTP API** interface for the integration. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-QDZY8DFN.png) - **HTTP API Enabled**: Enable or disable the HTTP API function for third-party integration. If the function is disabled, any request to initiate the integration will be denied and return HTTP 403 forbidden status. - **Authorization Mode**: Select among the following options: None, Normal, Allowlist, Basic, Digest, and Token for authorization type, which will be explained in detail in the following chart. - **Username**: Enter the username when **Basic** or **Digest** authorization mode is selected. The default username is admin. - **Password**: Enter the password when **Basic** or **Digest** authorization mode is selected. The default password is admin. - **1st IP-5th IP**: Enter the IP address of the third-party devices when the **Allowlist** authorization is selected for the integration. **Please refer to the following description for the authentication mode:** | Authorization Mode | Description | | --- | --- | | None | No authentication is required. This mode is intended for testing only and is not recommended in production environments. | | Normal | Reserved for Akuvox internal development and testing. | | Allowlist | Authenticates requests based on the source IP address. Add the IP address of the third-party device to the allowlist before sending requests. Recommended for trusted LAN environments. | | Basic | Authenticates requests using a username and password. The credentials must be Base64-encoded and included in the **Authorization** header. | | Digest | Authenticates requests using HTTP Digest authentication. Only the **MD5** algorithm is supported. | | Token | Reserved for Akuvox internal development and testing. | ## Power Output Control The device can serve as a power supply for the external relays. Click [here](https://knowledge.akuvox.com/docs/devices-supporting-12v-power-output) to view the power output requirements and the [wiring example](https://knowledge.akuvox.com/docs/devices-supporting-12v-power-output#wiring). Set it up on the web **Access Control > Relay > 12V Power Output** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-ITXCMQ1N.png) - **12V Power Output**: - **Disabled**: Disable the power output function. - **Always**: Provide continuous power to the third-party device. - **Triggered By Open Relay**: Provide power to the third-party device via the 12V output and GND interface during the timeout when the status of relays is shifted from low to high. - **Time Out (Sec)**: Select the power supply time duration after the relay is triggered from 3, 5, or 10. It is 3 seconds by default. The power output is 12V, and the maximum output amperage is 0.5A. ## Data Transmission Type for Third-Party Camera You can select the data transmission type between the device and a third-party camera when it is connected to the SmartPlus Cloud. To set it up, go to the **Surveillance > Camera** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-M0EADK1Z.png) - **UDP**: An unreliable but very efficient transport layer protocol. - **TCP**: A less efficient but reliable transport layer protocol. It is the default transport protocol.