---
title: "Introduction to Configuration Menu"
slug: "introduction-to-configuration-menu-16"
updated: 2025-08-27T02:37:42Z
published: 2025-08-27T02:37:42Z
canonical: "knowledge.akuvox.com/introduction-to-configuration-menu-16"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Introduction to Configuration Menu

- **Quick Start**: This section provides quick access to the device’s key settings, such as network, user, relay, etc.
- **Device Management**:
  - **Status**: This section gives you basic information, such as product information, network information, account information, etc.
  - **Account**: This section concerns the SIP account, SIP server, proxy server, transport protocol type, audio and video codec, DTMF, etc.
  - **Network**: This section mainly deals with network connection, RTP port setting, device deployment, etc.
  - **Device**: This section includes time & language, call feature, screen display, multicast, audio intercom feature, monitor, relay, lift control, etc.
  - **Contacts**: This section allows the user to configure the local contact list stored in the device.
  - **Upgrade:** This section covers firmware upgrade, device reset & reboot, configuration file auto-provisioning, and PCAP.
  - **Arming**: This section covers the configuration, including arming zone setting, arming mode, disarm code, and alarm action.
  - **Security**: This section is for password modification, account status & session time-out configuration, as well as certificates upload.
  - **Settings**: This section includes the RTSP and power output settings.
- **Engineer Management**: This section provides quick access to upgrading, maintaining, and debugging the device.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-6VVK635H.png)

## Introduction to Quick Start Module

The Quick Start module allows you to configure the device’s core features on a single interface, instead of switching between different interfaces.

You can redirect to the feature detail interface by clicking **Details** in the upper right corner.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-OGPYJDHM.png)

- **Network**: Display the location information of the device.
  - **Device Name**: Enter the device’s name to distinguish it from others. By default, it is [*the device name_the last 4 characters of its MAC address*].
  - **Connect Mode**: It is automatically set up according to the actual device connection with a specific server in the network, such as SDMC, Cloud, or None.
- **Directory**: Display all local contacts.
  - **Contacts List**: All Contacts displays all the contacts in the contact list. Blocklist displays the contacts in the blocklist.
  - **Name**: The contact's name to distinguish it from others.
  - **Number 1/2**: The SIP or IP number of the contact.
  - **Group**: Calls from contacts in the Blocklist will be rejected.
  - **Ringtone**: The ringtone for the incoming call from the contact.
  - **Account**: The account to make the call, Account 1 or Account 2.
- **Access**: You can set up HTTP commands to remotely control relays connected to door phones.
  - **IP/SIP**: Specify the IP or SIP number of the door phone.
  - **URL**: Enter the HTTP URL.
  - **Username**: Enter the username the same as that is configured on the door phone’s web interface.
  - **Password**: Enter the password the same as that is configured on the door phone’s web interface.
  - **DoorNum**: Specify the door to be opened.

> [!WARNING]
> Tip
> 
> Here is an HTTP command URL example for relay triggering.
> 
> ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-WFF67K8T.png)

> [!NOTE]
> **Note**
> 
> The HTTP format for relay triggering varies depending on whether the device's high secure mode is enabled. Please refer to this how-to guide [Opening the Door via HTTP Command](https://knowledge.akuvox.com/docs/open-door-via-http-command) for more information.

- **Door Phone**: You can add video streams of door phones via RTSP.
  - **Display Building Door Phone**: Set whether to display door phones at the building gate in the monitoring list.
  - **Display Public Door Phone**: Set whether to display door phones in the public area in the monitoring list.
  - **Device Number**: The device's SIP/IP number for identification.
  - **Device Name**: The device name for identification.
  - **RTSP Address**: The RTSP address of the monitoring device. RTSP format: *rtsp://Device IP address/live/ch00_0.*
  - **Username**: The username of the monitoring device for authentication.
  - **Password**: The password of the monitoring device for authentication.
  - **Display In Call**: Enable it to display the monitoring video during a call.