--- title: "Introduction to Configuration Menu" slug: "introduction-to-configuration-menu-27" status: "update" updated: 2026-11-05T07:17:59Z published: 2026-11-05T07:17:59Z canonical: "knowledge.akuvox.com/introduction-to-configuration-menu-27" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # Introduction to Configuration Menu - **Quick Start**: This section provides quick access to the device’s key settings, such as network, user, relay, etc. - **Status**: This section gives you basic information, such as product information, network information, account information, etc. - **Account**: This section concerns the SIP account, SIP server, proxy server, transport protocol type, audio & video codec, DTMF, etc. - **Network:** This section mainly deals with DHCP & static IP settings, RTP port settings, device deployment, etc. - **Intercom**: This section includes LCD settings, call features, multicast, etc. - **Surveillance**: This section covers motion detection, RTSP settings, etc. - **Access Control**: This section covers relay settings, card settings, PIN settings, etc. - **Directory**: This section is for user management. - **Device**: This section covers LCD, light, Wiegand, audio, and lift control settings. - **Setting**: This section covers time and language, action, schedule, and HTTP API settings. - **System**: This section is for upgrading, maintenance, auto-provisioning, etc. - **Engineer Management**: This section provides quick access to upgrading, maintaining, and debugging the device. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-LXIGDEL0.png) ## Introduction to Quick Start Module The Quick Start module allows you to configure the device’s core features on a single interface, instead of switching between different interfaces. You can redirect to the feature detail interface by clicking **Details** in the upper right corner. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-9XHKNE8R.png) - **Network**: Display the location information of the device. - **Device Location**: Enter the device’s location to distinguish it from others. By default, it is [*the device name_the last 4 characters of its MAC address*]. - **Connect Type**: It is automatically set up according to the actual device connection with a specific server in the network, such as SDMC, Cloud, or None. - **Auto-Discovery Contact List**: Display the contacts, such as indoor monitors, in the [Self-organizing Network Solution](https://knowledge.akuvox.com/docs/self-organizing-network-solution-for-community-projects-1). - **Show LCD Auto-Discovery Contact List**: Set whether to display these contacts on the device screen. - **Directory**: **Contact Display Mode** sets how contacts will be displayed. - **All Contacts**: Display all the contacts. - **Groups Only**: Display contact groups. Press the desired group on the device screen to make a group call. - **Contact Display by Group**: Display contacts by groups. Press the group, and users can see the contacts in it. - **Do Not Display Contacts**: Neither contacts nor groups will display. - [**Open Relay Via HTTP**](https://knowledge.akuvox.com/docs/door-opening-configuration-23#unlock-by-http-command): - **Session Check**: When enabled, the HTTP unlock requires logging into the device’s web interface. Or, the door opening may fail. - **Username**: Set a username for authentication in HTTP command URLs. - **Password**: Set a password for authentication in HTTP command URLs.