IT88 Firmware

Updated
  • Updated on Mar 11, 2026
  • Published on Feb 9, 2023
Prev Next

IT88 Release Firmware (Click to download)
Version: 88.30.12.701

IT88 Beta Firmware (Click to download)
Version: 88.30.14.701

Note
  • It is recommended to use Release and LTS version firmware.

Release Notes

Version: 88.30.14.701 (Beta)

Release Date: March 6, 2026
Supported SmartPlus Version: V7.2

New Features

  1. Support the power-off memory feature for the integrated Akubela R8.
  2. Improved storage display by showing both total storage and available storage.

Version: 88.30.14.603 (Beta)

Release Date: February 10, 2026
Supported SmartPlus Version: V7.2

New Features

  1. Support selecting the preferred network connection.
  2. Support changing the connect mode on the device’s web portal.
  3. Support locking third-party apps.
  4. Support mandatory password change.
  5. Added the Hold Delay option for configuring external relays.
  6. Optimized the integration with akubela RCU.
  7. Support installing the .xapx format third-party apps.
  8. Support sounding an alarm when the emergency unlock happens.
  9. Support receiving voice messages from the SmartPlus cloud.
  10. Changed the External Relay module display layout from 2×2 to 3×3 per page.
  11. Added Security Check when modifying Security Question.
  12. Added Initial Setup when powering on the device.
  13. Added mutual exclusion for the three RS485 relay states when connected to rolling doors or curtains, ensuring only one relay can be active at a time.
  14. Added a permission rule allowing door unlocking only within the configured valid time period.
  15. Added Remote Control feature.
  16. Support sending a notification to the device when operating the emergency unlock on the cloud.

Optimization

  1. Optimized entry of call features.
  2. Modified browser tab text of web portal.
  3. Restricted web browser access by disabling long-press on the contact IP address.
  4. Standardized the Host Name for devices.
  5. Adjusted the priority of pop-up prompt.
  6. Synchronized the unlock tab label on the Monitor, Call, and Call Preview pages to “Unlock.”
  7. Disabled to disarm device on the web interface when device arming mode is triggered.
  8. Optimized text of Network Detection interface.

Version: 88.30.14.402 (Beta)

Release Date: December 2, 2025
Supported SmartPlus Version: V7.2

New Features

  1. Restricted web browser access by disabling long-press on the contact IP address.
  2. Support disabling the Bell Input.
  3. Removed the H.265.
  4. Changed unlock button display name on Talking, Call Preview, and Monitor page to "Unlock".
  5. Optimized the integration with akubela RCU.

Optimization

  1. Adjusted the priority of the prompt pop-up.
  2. Changed IP Phone entry to Indoor Monitor.
  3. Standardized the Host Name for devices.

Version: 88.30.14.301 (Beta)

Release Date: October 13, 2025
Supported SmartPlus Version: V7.2

Fixed Bug

  • Fixed an issue affecting call audio quality.

Version: 88.30.14.202 (Beta)

Release Date: September 19, 2025
Supported SmartPlus Version: V7.2

New Features

  1. Support disabling Bell Input.
  2. Removed H.265.

Version: 88.30.13.901 (Beta)

Release Date: July 11, 2025
Supported SmartPlus Version: V7.1

New Feature

  • Support keeping the monitoring screen on.

Version: 88.30.13.801 (Beta)

Release Date: June 26, 2025
Supported SmartPlus Version: V7.1

New Features

  1. Support hiding entries on the Settings screen.
  2. Support keeping the monitoring screen on.
  3. Support switching monitor for X910 between main camera, auxiliary camera, and third-party cameras.
  4. Restricted web browser access by disabling long press on URLs.

Version: 88.30.13.705 (Beta)

Release Date: June 5, 2025
Supported SmartPlus Version: V7.1

Optimization

  • Optimized using experience.

Version: 88.30.13.704 (Beta)

Release Date: May 29, 2025
Supported SmartPlus Version: V7.1

New Features

  1. Support network detection.
  2. Support the video storage feature.
  3. Changed video recording to start from call preview until the end.
  4. Support enabling/disabling the use of the Management Center contact.
  5. Support uploading the incoming call ringtone.
  6. Support viewing the third-party camera’s stream when it is linked to an access control terminal.
  7. Support configuring the connected akubela RCU both on the device web and the SmartPlus Cloud.
  8. Support integration with Control4.
  9. Added the port option for remotely accessing other intercom devices’ web settings.
  10. Support a new LCD language: Hebrew.
  11. Support calling the door phone during monitoring.
  12. Support remotely opening the indoor monitor’s relay without authentication when its username and password are not set.
  13. Support switching the live streams between the main and auxiliary cameras during a call with the door phone X910.
  14. Updated time zone file.
  15. Support SSRC for cloud monitor.
  16. Set the unlock icon on the Talking, Call Preview, and Monitor pages to Auto by default. For local devices, this corresponds to the first relay, while for on-cloud devices, it follows the cloud-configured settings.

Version: 88.30.13.702 (Beta)

Release Date: May 20, 2025
Supported SmartPlus Version: V7.1

Fixed Bug

  • Resolved UI display issues occurring on IT88P devices.
Note
  • This version does not support dual Ethernet ports.

Version: 88.30.12.904 (Beta)

Release Date: October 28, 2024
Supported SmartPlus Version: V7.0

New Features

  1. Support modifying device language on the web interface.
  2. Added pop-up for alarm delay, requiring disarm code to cancel a triggered alarm.
  3. Set the door phone RTSP default username and password, which are both admin.
  4. Support Akuvox-MK485 and RSAC-C1-R8 relay.
  5. Added secondary confirmation pop-up for adding contacts to the blocklist.
  6. Support 4K byte messages for cloud messages.
  7. Support making group calls to Property Manager App and guard phone.
  8. Support setting screen sleep time on the web portal.

Optimization

  • Optimized French language text.

Version: 88.30.12.701 (Release)

Release Date: August 21, 2024
Supported SmartPlus Version: V7.0

New Features

  1. Support hiding useless buttons for talking and monitor interface.
  2. Support receiving HTTP commands to trigger alarms.
  3. Unified DTMF feature name.
  4. Support synchronizing relay information of the unlock icon on the monitor, preview, and talking interface from the cloud, which does not require configuration.
  5. Support opening different relays of one door phone by the unlock buttons on the monitor page.
  6. Support adding multiple unlock keys for Homepage and More Settings pages.
  7. Added Forget Wi-Fi option.
  8. Modified prompt of Forget Password and method of setting a new password.
  9. Added a pop-up alert for IP address conflicts.
  10. Added a separate switch setting to control whether incoming calls (automatically triggered events) trigger the relay.
  11. Support checking Used Storage.
  12. Removed HTTP switch and port.
  13. Added a secondary confirmation pop-up and status icon when enabling DND.
  14. Changed the font of the web interface to the browser's automatically.
  15. Changed device text font to Roboto.
  16. Support automatic hiding of virtual buttons, network, and date/time without user action, when using third-party apps.
  17. Added notification popup of App messages.
  18. Removed previously set security questions and answers when modifying security questions.

Optimized Features

  1. Improved Spanish entries.
  2. Optimized in-batch Autop, which reduces screen refresh frequency.
Akuvox is a global leading provider of Smart Intercom products and solutions. We are committed to unleashing the power of technologies to improve people's lives with better communication, greater security and more convenience.
Products
Support
Company
Follow Us
© Copyright 2012-2025 Akuvox (Xiamen) Networks Co., Ltd. All rights Reserved