---
title: "Language and Time"
slug: "language-and-time-12"
updated: 2026-09-01T01:34:34Z
published: 2026-09-01T05:43:03Z
canonical: "knowledge.akuvox.com/language-and-time-12"
stale: true
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Language and Time

## Language

Switch the device's web language in the upper-right corner.

The following languages are supported:

- English, Simplified Chinese, Traditional Chinese, Russian, Korean, Portuguese, Spanish, Italian, Dutch, French, German, Polish, Turkish, Japanese, Vietnamese, Czech, Norwegian, Swedish, Ukrainian, and Arabic.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-FJGR28GI.png)

## Time

The time settings on the web interface allow you to configure the NTP server address for automatic time and date synchronization. Once a time zone is selected, the device will notify the NTP server of the chosen time zone, enabling it to synchronize the time zone settings on your device.

Set up time on the **Settings > Time** interface.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-JFKVVJ63.png)

- **Automatic Date & Time**: When enabled, the device’s date and time are automatically set up and synchronized with the default time zone and the NTP server (Network Time Protocol).
- **Preferred Server**: Enter the primary NTP server address for updating the time. The default NTP server address is 0.pool.ntp.org.
- **Alternate Server**: Enter the backup NTP server address when the primary one fails.
- **Update Interval**: The interval between two consecutive NTP requests.

## Daylight Saving Time

Daylight Saving Time is the practice of advancing clocks (typically by one hour) during warmer months so that darkness falls at a later clock time. You can modify the time parameters to achieve longer evenings or daytime, especially in summer.

Set it up on the **Settings > Time** interface.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-0GHN3F8T.png)

- **Enable Daylight Saving Time**: Enable or disable the feature. **Auto** means that the device adjusts the daylight saving time automatically.
- **Offset**: 60 minutes by default, setting the clocks an hour ahead of the standard time.
- **By Date/By Week**: **By Date** sets the date schedule for daylight saving time. **By Week** sets the schedule for daylight saving time according to the week and month.