Language
You can select the device LCD language on the Setting> Time/Lang > LCD Language interface.
The following languages are supported:
English, Simplified Chinese, Russian, Korean, Dutch, French, German, Hebrew, Norwegian, Ukrainian, Turkish, Arabic, Spanish, Japanese, and Traditional Chinese.
You can switch the web language in the upper right corner.
The following languages are supported: English, Simplified Chinese, Spanish, Japanese, and Korean.
Time
The time settings on the web interface allow you to configure the NTP server address for automatic time and date synchronization. Once a time zone is selected, the device will notify the NTP server of the chosen time zone, enabling it to synchronize the time zone settings on your device.
To set up time, go to Setting > Time/Lang interface.
Automatic Date&Time Enabled: Set whether the device updates the time automatically via the Network Time Protocol(NTP) server.
Date/Time: Set the date and time for the device manually when you disable the automatic date and time service.
Time Zone: Select the specific time zone based on where the device is used. The default time zone is GMT+0:00.
Preferred Server: Enter the primary NTP server address for updating the time. The default NTP server address is 0.pool.ntp.org.
Alternate Server: Enter the backup NTP server address when the primary one fails.
Update Interval: Set the time update interval. For example, if you set it as 3600s, the device will send a request to the NTP server for the time update every 3600 seconds.
Current Time: Display the current device time.