--- title: "LED Setting" slug: "led-setting-11-1" updated: 2025-07-03T02:35:31Z published: 2025-07-03T02:35:31Z canonical: "knowledge.akuvox.com/led-setting-11-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # LED Setting ## LED Setting on Card Reader Area You can enable or disable the LED lighting on the card reader area. You can also set a specific time to turn on the light. To set it up, go to **Device > Light** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/图片-QTG21G8Y.png) - **Backlight Intensity**: Adjust the backlight intensity; the bigger the value, the brighter the backlight. - **Start Time - End Time (Hour)**: Select the time span for the LED lighting to be valid, e.g., if the time span is from 18-22, it means the LED light will stay on during the time span from 6:00 pm to 10:00 pm in one day (24 hours). ## Light Blink Control You can disable all light blinking effects for a scheduled time, including network connection, door opening, and TOF trigger indications. To set it up, go to **Device > Light** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-41CCEJJC.png) - **Disable Blinking**: The feature is disabled by default. - **Effective Schedule**: Apply [the schedule](https://knowledge.akuvox.com/docs/door-access-schedule-management-18-1) to the feature by moving it from the left to the right box.