LED Fill Light
LED fill light is mainly designed to reinforce the light at night or in a dark environment.
Set it up on the Device > Light > LED Light interface.
Mode:
Auto: The device adjusts the LED mode automatically based on the photoresistor value. The higher the value is, the darker the environment is. The device will enable the infrared fill light and switch on the black-and-white filter mode.
Always Off: Turn off the infrared fill light. The device is in colored mode.
Always On: Turn on the infrared fill light. The device is in black-and-white mode.
Specific Time: Set the specific time to enable the infrared fill light. Beyond this time, the device will enable/disable the infrared fill light automatically based on the photoresistor value.
Photoresistor Setting: Set the minimum and maximum photoresistor values to automatically control the ON-OFF of the infrared LED light. If the photoresistor value is less than the minimum threshold, turn it off. If the photoresistor value is greater than the maximum threshold, turn it on.
Current Photoresistor: Click Read to obtain the current photoresistor value. The photoresistor values inversely relate to light intensity: higher values indicate weaker light and lower values indicate stronger light.
IR LED Brightness: Set the brightness of the infrared light. The default is 7.
LED Setting on Card Reader Area
You can enable or disable the LED lighting on the card reader area. You can also set a specific time to turn on the light.
Set it up on the Device > Light > Light of Swiping Card Area interface.
Enabled: When enabled, specify the time to keep the card reader light on.
LED Light Status
The LED display adjustment indicates the light changes of the call button in different states. The LED status allows users to verify the device's current mode.
Set it up on the web Device > Light > Status Light interface.
Device Status: The indicator light can indicate 8 statuses.
Color: Select from Blue, Red, Green, Cyan, Yellow, White, and Purple. The light color of the Emergency Alarm status cannot be changed.
Display Mode: Set different flashing frequencies. The display mode of the Emergency Alarm status cannot be changed.
White Light Setting
White light LED is mainly used to reinforce the lighting for the QR code access and for the greater visibility of the visitors when seeing their images from indoors in a dark environment.
Set it up on the Device > Light > White Light interface. It is enabled by default.
Light Intensity: Set the white light value from 0-100. The default is 50. The greater the value is, the brighter the light will be.