--- title: "LED Setting" slug: "led-setting-13" updated: 2026-03-17T01:50:34Z published: 2026-03-17T01:50:34Z canonical: "knowledge.akuvox.com/led-setting-13" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # LED Setting ## LED Fill Light LED fill light is mainly designed to reinforce the light at night or in a dark environment. Set it up on the **Device > Light > LED Light** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-2SRD4D6B.png) - **Mode**: - **Auto**: The device adjusts the LED mode automatically based on the photoresistor value. The higher the value is, the darker the environment is. The device will enable the infrared fill light and switch on the black-and-white filter mode. - **Always Off**: Turn off the infrared fill light. The device is in colored mode. - **Always On**: Turn on the infrared fill light. The device is in black-and-white mode. - **Specific Time**: Set the specific time to enable the infrared fill light. Beyond this time, the device will enable/disable the infrared fill light automatically based on the photoresistor value. - **Photoresistor Setting**: Set the minimum and maximum photoresistor values to automatically control the ON-OFF of the infrared LED light. If the photoresistor value is less than the minimum threshold, turn it off. If the photoresistor value is greater than the maximum threshold, turn it on. - **Current Photoresistor**: Click **Read** to obtain the current photoresistor value. The photoresistor values inversely relate to light intensity: higher values indicate weaker light and lower values indicate stronger light. - **IR LED Brightness**: Set the brightness of the infrared light. The default is 7. ## LED Setting on Card Reader Area You can enable or disable the LED lighting on the card reader area. You can also set a specific time to turn on the light. Set it up on the **Device > Light > Light of Swiping Card Area** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-Q3SG80GF.png) - **Enabled**: When enabled, specify the time to keep the card reader light on. ## LED Status The LED display adjustment indicates the light changes of the call button in different states. The LED status allows users to verify the device's current mode. Set it up on the web **Device > Light > Status Light** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-9WT8AM90.png) - **Device Status:** The indicator light can indicate 8 statuses. - **Input Trigger**: Set the LED color and display mode when the input interface is triggered. The default is **Null**, indicating no LED change. - **Color:** Select from Blue, Red, Green, Cyan, Yellow, White, and Purple. The light color of the Emergency Alarm status cannot be changed. - **Display Mode:** Set different flashing frequencies. The display mode of the Emergency Alarm status cannot be changed. ## White Light Setting The white light is mainly used to reinforce the lighting for QR code access and for greater visibility of visitors when seeing their images from indoors in a dark environment. Set it up on the **Device > Light > White Light** interface. It is enabled by default. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-AQUNAMX9.png) - **Light Intensity**: Set the white light value from 0-100. The default is 50. The greater the value is, the brighter the light will be.