---
title: "LED Setting"
slug: "led-setting-4"
updated: 2025-07-08T08:58:25Z
published: 2025-07-08T08:58:25Z
canonical: "knowledge.akuvox.com/led-setting-4"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# LED Setting

## LED Light Setting

LED fill light is mainly designed to reinforce the light at night or in a dark environment.

Set it up on the **Device > Light > LED Fill Light** interface.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-66IAH9TC.png)

- **Mode:**
  - **Auto**: Turn on the LED light automatically based on the minimum and maximum photoresistor value.
  - **Always OFF:** Turn off the LED light.
  - **Specific Time:** Turn on the LED according to the schedule.
- **Min/Max Photoresistor:** Set the minimum and maximum photoresistor value to automatically control the ON-OFF of the LED light. If the photoresistor value is less than the minimum threshold, turn off the LED. If the photoresistor value is greater than the maximum threshold, turn on the LED.

## LED Light Status

LED display adjustment is used to indicate the light changes of the call button in different states. The LED status allows users to verify the current mode of the device.

Set it up on the web **Device > Light > Light of The Button** interface.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-04B44RRA.png)

- **Device Status:** There are six statuses: Normal, Offline, Calling, Talking, Receiving, and Emergency Alarm. The status cannot be changed.
- **Color:** Select from Blue, Red, and Purple. You can select Red & Blue(flashing red and blue alternately) for Emergency Alarm status.
- **Display Mode:** Set the different flashing frequencies.

## Card Reader Area LED Control

You can enable or disable the LED lighting on the card reader area. You can also set a specific time to turn on the light.

Set it up on the **Device > Light > Light of The Card Reader** interface.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-F60C8W0Q.png)

- **Start Time - End Time(Hour):** Set the LED light valid time. If the time is set from 8-0(Start time - End time), the LED light will stay on from 8:00 a.m. to 12:00 p.m. for one day(24 hours).