--- title: "LED Setting" slug: "led-setting-5" updated: 2025-02-18T02:23:26Z published: 2025-02-18T03:23:14Z canonical: "knowledge.akuvox.com/led-setting-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # LED Setting ## Infrared LED Setting Infrared LED is mainly designed to reinforce the light for facial recognition at night or in a dark environment. Set it up on the **Intercom > LED Setting > LED Setting** interface. ![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87%28645%29.png) - **Device Status:** There are five statuses, Normal, Offline, Calling, Talking, and Receiving. The status cannot be changed. - **Color:** Select from Red, Green, Blue, and Yellow. - **Display Mode:** Set the different flashing frequencies. ## LED Control You can enable or disable the LED on the **Intercom > LED Setting** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-EDDU6R02.png) ## Photoresistor Setting You can set the minimum and maximum photoresistor value to automatically control the ON-OFF of the infrared fill light. To set it up, go to the **Intercom > Advanced** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-RQ1OSKEF.png) - **Photoresistor Setting**: If the photoresistor value is less than the minimum threshold, turn off the infrared fill light. If the photoresistor value is greater than the maximum threshold, turn it on. - **Now**: Click **Read** to obtain the current photoresistor value.