--- title: "LED Setting" slug: "led-setting" updated: 2025-12-31T03:09:57Z published: 2025-12-31T03:09:57Z canonical: "knowledge.akuvox.com/led-setting" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt > Use this file to discover all available pages before exploring further. # LED Setting ## LED Fill Light LED fill light is mainly designed to reinforce the light at night or in a dark environment. Set it up on the web **Device > Light > LED Fill Light** interface. ![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87-LMP5E264.png) - **Mode**: - **Auto**: Turn on the LED light automatically based on the minimum and maximum photoresistor value. - **Always On**: Enable the LED light. - **Always Off**: Disable the LED light. - **Schedule**: Turn on the LED light based on the schedule. - **Min/Max Photoresistor**: Set the minimum and maximum photoresistor value to automatically control the ON-OFF of the LED light. If the photoresistor value is less than the minimum threshold, turn off the LED. If the photoresistor value is greater than the maximum threshold, turn on the LED. ## LED Display Status LED display adjustment is used to indicate the light changes of the call button in 5 statuses: normal (idle), offline, calling, talking, and receiving a call. The LED status allows users to verify the current mode of the device. Set it up on the web **Device > Light > LED Status** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-PWFF4CJJ.png) - **Device Status**: There are five statuses: Normal, Offline, Calling, Talking, and Receiving. - **LED Color**: Three LED colors are available for each option: Blue, Red, and Green. - **LED Display Mode**: Select the desired LED blinking frequency. ## LED Wakeup Mode You can set the LED to be controlled by infrared detection. To set it up, go to the **Device > Light > LED Control** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1724234857267.png) - **Wake Mode**: - **Auto**: When the infrared detection is triggered, the LED will be on. - **Manual**: The LED will not be controlled by infrared detection. You need to manually set up the LED-enabled time. ## Control LED Display by HTTP URL You can enter an HTTP URL in a browser to manage the LED color and frequency. To set it up, go to the **Device > Light > LED Control** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1724234056229.png) The HTTP URL format is http://device IP/fcgi/do?action=LedAction&State=1&Color=1&Mode=2500. Replace the number in the format to change the LED to the desired status. - State: 1=Normal ;2=OffLine ;3=Calling;4=Talking;5=Receiving; - Color: 0=Red;1=Green;2=Blue; - Mode: 0=Always On;1=Always Off;500/1000/1500/2000/2500/3000=Corresponding blinking frequency. ## Card Reader LED Control You can enable or disable the LED lighting on the card reader area. You can also set a specific time to turn on the light. To set it up, go to the **Device > Light > LED Control** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-1724392942243.png) - **Card LED Enabled**: When enabled, specify the period when the light is on. ## Keypad LED Control For R20B, you can enable or disable the LED lighting for buttons. You can also set a specific time to turn on the light. To set it up, go to the **Device > LED Setting > LED Control** interface. ![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-QL9R7KJT.png)