---
title: "Lift Control"
slug: "lift-control-36"
updated: 2025-09-26T06:53:59Z
published: 2025-09-26T06:53:59Z
canonical: "knowledge.akuvox.com/lift-control-36"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Lift Control

To set it up, go to the **Intercom > Lift Control** interface.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-3H3TNB6S.png)

- **Lift Control List:** Select the lift controller brand.
  - **None**: The integration will be disabled.
  - **Chiyu**: Integrate with Chiyu lift controller.
  - **KeyKing**: Integrate with KeyKing lift controller.
  - **Akuvox EC32**: Connect the device with the Akuvox EC33 lift controller.
  - **ZKT**: Integrate with ZKTeco lift controller.

## Akuvox Lift Controller

After selecting Akuvox EC32 in the Lift Control List, you need to set up relevant parameters.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-VBQLWA8L.png)

- **Floor Starts From**: Set the floor from which the floor count starts. for example, if you select -3, then the 3rd floor in the basement will be considered as the first floor matched with relay#1 (first floor).
- **Ground Floor**: If there are ground floors between the -1 and 1 floors, configure this option.
- **Server IP:** Enter the IP address of the Akuvox lift controller.
- **Port:** Enter the port of the Akuvox lift controller.
- **Timeout(Sec):** Decide the time limit within which users should press the lift button of their desired floors.
- **User Name:** Enter the user name set in the lift controller.
- **Password:** Enter the password set in the lift controller.
- **Floor NO. Parameter:** The floor number parameter is provided by Akuvox. The default is **$floor**. You can define your parameter string.
- **URL To Trigger Specific Floor:** The Akuvox lift control URL for triggering a specific floor. The URL is /cdor.cgi?open=0&door=$floor, but the string $floor at the end must be identical to the parameter string you defined.
- **URL To Trigger All Floors:** The Akuvox URL for triggering all floors.
- **URL To Close All Floors:** The Akuvox URL for closing all floors.

## KeyKing Lift Controller

After selecting KeyKing, you need to set the KeyKing address.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-NDFMSYWZ.png)

- **Floor Starts From**: Set the floor from which the floor count starts. for example, if you select -3, then the 3rd floor in the basement will be considered as the first floor matched with relay#1 (first floor).
- **Ground Floor**: If there are ground floors between the -1 and 1 floors, configure this option.
- **KeyKing Address**: Select the number from 0 to 126. The binary number converted from the address number corresponds to the dip switch on the lift board. For example, if you select 5, set the dip switch to 101000.

## ZKT Lift Controller

After selecting ZKT, you need to set up relevant parameters.

![](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/image-KPVG8GEH.png)

- **Floor Starts From**: Set the floor from which the floor count starts. for example, if you select -3, then the 3rd floor in the basement will be considered as the first floor matched with relay#1 (first floor).
- **Ground Floor**: If there are ground floors between the -1 and 1 floors, configure this option.
- **Server IP:** Enter the IP address of the controller server.
- **Port:** Enter the port of the controller server.
- **Timeout(Sec):** Decide the time limit within which users should press the lift button of their desired floors.