---
title: "Make Calls on Door Phones' Web Interface"
slug: "make-calls-on-door-phones-web-interface"
updated: 2026-02-27T03:14:52Z
published: 2026-02-27T03:14:52Z
canonical: "knowledge.akuvox.com/make-calls-on-door-phones-web-interface"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.akuvox.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Make Calls on Intercom Devices' Web Interfaces

Web call enables you to make calls on the device's web interface. It can be used to test remotely whether devices can make calls normally.

Take R29 as an example.

## Steps

1. Use the device IP to log in to its web interface. The default username and password are **admin**.
2. Go to **System > Maintenance > Web Call** interface. Enter the SIP number or IP number.

> [!NOTE]
> Note
> 
> To make IP calls, make sure:
> 
> - The calling and called devices are within the same local network.
> - Direct IP call feature is enabled on both sides. It is enabled by default.

![图片.png](https://cdn.document360.io/f09a6106-e976-455e-b2d0-3d88b5385960/Images/Documentation/%E5%9B%BE%E7%89%87-8WF078AL.png)

1. Select the registered SIP account to make the call. If both accounts are registered and you select **Auto**, calls will be made by Account 1.

> [!WARNING]
> Tip
> 
> See how to register a SIP account: [Register SIP Account on Akuvox Door Phones](https://knowledge.akuvox.com/docs/how-to-register-sip-server?highlight=SIP%20account).

1. Click **Dial Out** to make the call and end the session by clicking **Hang Up**.